Engine Stand Utilization Report: What Added CFM56-5A/B Capacity Means for Heavy Maintenance Season
Key Highlights
- Outbound leases exceeded returns in September, with activity focused on mature narrowbody engine families and CFM56-5A/B stand utilization reaching 97%.
- CFM56-7B recorded the month’s largest stand movement, reaching its highest utilization level since March.
- September inquiries for October requirements point to earlier maintenance planning amid tight stand capacity.
As the heavy maintenance season begins, reviewing engine stand utilization from September 2026 can identify trends in engine maintenance demand.
According to reports from EngineStands.com, “Acting on what the team was already seeing in utilization levels and customer demand, EngineStands.com moved early and added new CFM56-5A/B stands to its fleet ahead of the seasonal peak.”
They continue, “One of the newly manufactured units went directly from the manufacturer onto lease, indicating how little spare capacity is currently available.”
“At the same time, quote requests for stands supporting mature engine models increased as the market moved closer to the heavy maintenance season,” add the reports, “A considerable number of enquiries received during September were already for October requirements, indicating early preparation.”
What September 2026 engine stand usage says about narrowbody demand
According to reports from EngineStands.com, “The September EngineStands.com fleet data shows where that demand is currently concentrated. Outbound leases outweighed returns, and activity concentrated on mature narrowbody families.”
The reports explain, “CFM56-5A/B remained at exceptionally high utilization, with the existing fleet continuing to absorb available capacity as additional stands were being introduced.”
“CFM56-7B recorded the largest stand movement during the month, taking utilization to its highest monthly level since March,” add EngineStands.com reports.
They continue, “PW1100G-JM stayed at 97%, with almost all stands fully utilized.”
EngineStands.com data highlights a few key findings:
- PW1500G stands moved onto lease after being available in August.
- LEAP-1A lease and return activity was in balance, keeping the family broadly stable.
- V2500 recorded a return to the available pool, ready for the next requirement.
Why CFM56-5A/B remains under pressure
EngineStands.com experts state, “CFM56-5A/B remains one of the most heavily utilized families in the EngineStands.com portfolio, with utilization across all tracked stands reaching 97% this September.”
They explain, “Low retirement rates are keeping CFM56-powered Boeing 737NG and Airbus A320ceo-family aircraft in service for longer, extending the maintenance requirement around these mature fleets.”
“GE Aerospace entered 2026 expecting CFM56 retirements of 2–3% but was seeing only around 1.5–2% by September. At the same time, overhaul volumes remain strong, and the outlook for 2027 has strengthened further,” add EngineStands.com experts.
However, these reports note that narrowbody demand isn’t limited to only the CFM5 family, as various mature narrowbody engines call for significant MRO activity.
Reports from EngineStands.com note, “Pratt & Whitney expects V2500 shop visits in 2026 to remain around the more than 800 recorded in 2025, while MTU says that about 35% of the operating V2500 fleet has yet to undergo its second shop visit, supporting continued induction demand over the coming years.”
For engine stand providers, those shop visits translate into recurring requirements for:
- Engine removal
- Transportation
- Storage support
EngineStands.com reports elaborate, “When capacity is tight, operators and MROs depend even more on reliable providers that can ensure the right stand available where and when it is needed.”
How the MRO market is preparing earlier for heavy maintenance season
As data shows many engine stand inquiries made in September already covering October requirements, reports from EngineStands.com provide some context.
They state, “That lead time matters. For operators and MROs, booking earlier gives more flexibility around stand location, transport planning and the planned induction date, particularly for models already running at high utilization.”
The reports continue, “The behavior is consistent with broader MRO trends. Aviation Week's 2026 forecast expects Europe alone to account for 21% of global engine maintenance demand over 2026–35, representing approximately $180 billion of the projected $848 billion worldwide engine MRO market.”
“Industry analysis expects engine events to outnumber airframe events in Europe over the next decade, with CFM International engines driving the majority of that activity,” explain the reports.”
They add, “With more engine work moving through the system, stand planning becomes part of maintenance preparation rather than simply a transport requirement.”
How MRO Europe offers a chance to compare trends
With MRO Europe in late October, MROs, lessors and airlines were able to discuss preparations like:
- Maintenance plans
- Fleet requirements
- Capacity for coming months
EngineStands.com experts note, “The event is a chance to compare what we are seeing in utilization, quote activity and customer planning with the wider market, understand where pressure may build through the winter and into 2027 and use that insight to guide the company’s capacity decisions around what operators, MROs and lessors are preparing for next.”



