New Light Weight Belite Aircraft Completes Successful First Flight

Airplane that incorporates use of proprietary, lightweight carbon fiber material in the fabrication of struts, ribs, and wing spar debuts on July 4.
July 14, 2009
3 min read

WICHITA, KS — Piloted by James Wiebe, who designed it to comply with FAR Part 103 weight and regulatory requirements, the new Belite aircraft made a successful first flight on Saturday, July 4, 2009. Officially unveiled on June 30, the Belite is a single place airplane that incorporates the use of proprietary, lightweight carbon fiber material in the fabrication of struts, ribs, and wing spar. It provides the flight characteristics and handling of an airplane while operating under FAA guidelines that allow it to be flown without a pilot's license.

After an initial circuit of the pattern at Wichita's Colonel James M. Jabara Airport (AAO), Wiebe conducted additional flight and handling characteristics tests during a 90-minute session that also included several takeoffs and landings.

For the initial flight, the Belite was powered by a 28-hp MZ-34 engine. Plans call for the installation of larger, more powerful engine prior to the upcoming Experimental Aircraft Association (EAA) AirVenture Fly-In in Oshkosh, WI, at the end of this month. Though flown with a lower power engine and without the cowling installed, the Belite cruised at approximately 54 mph. Wiebe subsequently recorded a stall speed of 27 mph. The airplane also features an electrical system, MicroAir transceiver, transponder, fuel gauge, and a gizmo dock for a Garmin 496 in its panel.

"Flying the Belite for the first time was, for me, an extremely memorable event. While the rest of the country was focused on celebrating independence, I was experiencing it, making lazy circles in the sky above Jabara Airport," says Wiebe. "I have never flown in an airplane I built or on which I have designed critical structures before, so this definitely ranks among my most thrilling flying experiences."

Wiebe had previously conducted high speed taxi tests and had lifted the gear off the ground, but had not actually maneuvered or climbed out of ground effect until the evening of July 4.

"Once it was airborne, the airplane handled well. With the rear windows we have engineered into the fuselage and the transparent ‘turtle’ deck, the pilot has 360-degree visibility," he says. "As flown, the airplane weighed approximately 245 pounds and that included the optional rear window and a full VFR panel. It was especially impressive on landing because it practically hovers before touchdown and can be stopped within a very short distance."

Wiebe has reserved exhibit spaces 612 and 615 in the North Display area at EAA AirVenture. He will also have an aircraft on display in the Low Cost Flying Pavilion.

Phoenix Neutron Imaging
Actuator
Neutron imaging is used daily to test critical aerospace components, like high-pressure turbine blades, to catch critical flaws.
May 27, 2025
XTI Aerospace, Inc.
xti_aerospace_vertical_logo_black
The FAA selected the Ft. Worth, Texas, CBO to be the primary location for certification authority and approval.
May 27, 2025
Aircraft Owners and Pilots Association
screenshot_2752025_8453_outlook
Early Analysis videos provide an initial assessment of mishaps that generate large public interest and may indicate important safety lessons for the general aviation community...
May 27, 2025
Airbus
37ec3e53702a4d9b9d5c6ab2b270960a
Vietjet currently operates an all-Airbus fleet of 115 single aisle A320 Family aircraft and seven A330-300s.
May 27, 2025
MASkargo
img_00111024x614
The strategic collaboration will bring together the combined expertise and infrastructure of three leading players in the air cargo industry and is aimed at creating significant...
May 27, 2025
Sign up for Aviation Pros Newsletters
Get the latest news and updates.