Tempest-i ProMix with AirFirst

JBT is introducing its Tempest-i ProMix with AirFirst, now available with Type I/IV or Type I/II Prop-Mix. Pure Type I fluid is gently preheated to 160°F by fluid heater, and water is preheated to 155°F by plate heat exchanger. The preheat process takes approximately 55-65 minutes for 1,100 gallons of water and 700 gallons of pure deicing fluid. EZ-Heat technology automatically turns the heater on when spraying is demanded and quickly heats the pure fluid to a maximum spraying temperature of 180°F. Fluid mixing is done directly at the fluid pumps. Fluid purge is automatic if the engine is turned off and freeze protection is not plugged in. A purge only uses 4 gallons of pure fluid. The Freeze Protection system is designed for 240V 30 amp power supply. When plugged in, a temperature sensor closely monitors water temperature and slowly circulates the water preventing freezing. Battery charging and block heater are also integrated into this system.