MT-Propeller Entwicklung GmbH has received the Acceptance of EASA STC 10064889 for the Quiet Fan Jet composite propeller MTV-27-1-E-C-F-R(G)/CFR210-58( ) on the Beech 99/100 series by TCCA Canada.
The FAA STC is in progress.
MT-Propeller Vice President Martin Albrecht says, that the installation of the 5-blade MTV-27 Propellers on the Beech 99/100 Series feature the following advantages:
- Take-Off improvement by 10%
- No propeller speed restrictions on ground while operating in low idle
- Lower ITTs during start-up for less engine wear
- Significant cabin noise [up to 10 dB(A)]and vibration reduction
- Unbeatable esthetic ramp appeal
- Comply with the strict German noise regulations 2010 - „Landeplatz
Lärmschutz Verordnung“ for unrestricted airport operations in Germany and other
European Countries!
Due to the smaller diameter the MT-Propeller for the Beech 99/100 Series has more ground clearance for less blade tip erosion and FODs.
The MT-Propeller natural composite blades provide significant inside and outside noise reduction. They have no life limitation and are repairable in case of an FOD.
They also provide best vibration damping characteristics for almost vibration free propeller operation and have bonded on nickel alloy leading edges for superior erosion protection of the blades.
Fulfilling the highest certification requirements they are also supplemental type certified on Part 25 aircraft.
MT-Propeller is holder of over 220 STCs worldwide and OEM supplier for more than 90% of the European Aircraft Industry as well as 30% of the US Aircraft Industry. More than 25,000 propeller systems with more than 80,000 blades are in service.
150 Million fleet hours where already performed on MT-Propellers.
With the longest industry TBO of 4500 hours or 6 years for the 5-bladed turbo prop MT-Propeller has proven the reliability over years.
A factory certified network of 62 service centers, provides best service and maintenance all over the world.
