EASA Issues Warning for Airbus Instrument

EASA has issued a safety warning for an air speed sensor made by Goodrich Corp. for Airbus A330 and A340 jets.
Sept. 23, 2009
2 min read

BERLIN --

The European Aviation Safety Agency has issued a safety warning for an air speed sensor made by Goodrich Corp. for Airbus A330 and A340 jets, and urged airlines to test the device.

A version of the sensor - known as a pitot - made by French company Thales SA may have contributed to the June crash of an Air France Airbus A330 that killed 228 people, experts have suggested.

The emergency directive, effective from Wednesday, said malfunctions have been reported in the pitot tubes made by Goodrich, which is based in Charlotte, North Carolina.

Modern jet airliners carry at least three of the L-shaped metal pitot tubes that jut from the forward fuselage. They are susceptible to blockage from water and icing.

The Cologne-based agency said their directive addresses a potential in-flight air leak that could cause incorrect pressure and airspeed readings.

While the agency said the design was sound, it urged operators to test the devices - a relatively easy task that should not disrupt services, agency spokeswoman Savina Zakoula said.

"There has been a limited batch of Goodrich pitot tubes which had a quality issue," Airbus spokesman Stefan Schaffrath said. "Through the serial numbers, the faulty pitot tubes are perfectly identified."

He could not immediately say how many airlines or aircraft might be affected, but said the problem was "very limited."

Investigators trying to determine why the Air France flight crashed in June have focused on the possibility that the pitot tubes iced over and gave false speed readings to the plane's computers as it ran into a turbulent thunderstorm.

Copyright 2008 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
Sign up for Aviation Pros Newsletters
Get the latest news and updates.