Tempest-i ProMix with AirFirst

May 24, 2022

JBT is introducing its Tempest-i ProMix with AirFirst, now available with Type I/IV or Type I/II Prop-Mix. Pure Type I fluid is gently preheated to 160°F by fluid heater, and water is preheated to 155°F by plate heat exchanger. The preheat process takes approximately 55-65 minutes for 1,100 gallons of water and 700 gallons of pure deicing fluid. EZ-Heat technology automatically turns the heater on when spraying is demanded and quickly heats the pure fluid to a maximum spraying temperature of 180°F. Fluid mixing is done directly at the fluid pumps. Fluid purge is automatic if the engine is turned off and freeze protection is not plugged in. A purge only uses 4 gallons of pure fluid. The Freeze Protection system is designed for 240V 30 amp power supply. When plugged in, a temperature sensor closely monitors water temperature and slowly circulates the water preventing freezing. Battery charging and block heater are also integrated into this system.

Request More Information

By clicking above, I acknowledge and agree to Endeavor Business Media’s Terms of Service and to Endeavor Business Media's use of my contact information to communicate with me about offerings by Endeavor, its brands, affiliates and/or third-party partners, consistent with Endeavor's Privacy Policy. In addition, I understand that my personal information will be shared with any sponsor(s) of the resource, so they can contact me directly about their products or services. Please refer to the privacy policies of such sponsor(s) for more details on how your information will be used by them. You may unsubscribe at any time.