Aero Standard Calibration calibrates and repairs avionics test equipment. It has more than 30 years of experience in precision measurement services and its personnel have the training and ability to calibrate and repair down to component board level. Some of its capabilities include but, are not limited to: COMM, frequency, analog/digital multimeters, oscilloscopes, mode S, pulse, radar, RF generators, synchro/resolvers, angle postion indicators, VOR/ILS, and fuel quantity. It does not buy, sell, or distribute test equipment. You can find a complete list of capabilities at www.aerostandard.com.
- Product From W.L. Gore & Associates, Inc.
W. L. Gore & Associates offers a line of GORE Shielded Twisted Pair Cables, now constructed with uniquely engineered fluoropolymers to significantly reduce weight while maintaining reliable signal integrity for the most demanding environments of civil and military aerospace applications. These cables maintain high-speed communication between avionics transmitters and receivers and meet the performance requirements of ANSI/NEMA WC27500 Standards for Aerospace and Industrial Electrical Cable, type 24. These lighter-weight materials result in smaller cable diameters with a tight bend radius, which ultimately translates to substantially smaller, lighter and higher-density cable bundles for easy routing in confined spaces, making them especially well-suited for mil/aero harness applications. For more information visit
- Product From GPS Source Inc.
GLI-HANGAR moves the GPS signal inside an aircraft hangar, allowing uninterrupted GPS coverage within the hangar. Maintenance of GPS equipment on aircraft can occur at any time. It is a specialized kit that is safe, easy to install, and easy to use. You can save money and time by using the kit inside your hangar. For more information visit
- Product From DFW Instrument Corporation
The Automated RVSM/AOA-3CH Pitot Static Test Set, model DPST-9300A-3CH, is a fully automated flight line Angle of Attack/3 Channel Smart Probe Tester, designed to provide regulated total (PT) pressure and static (PS) pressure outputs (Altitude, Airspeed, Vertical Speed, & AOA parameters). The test set is certified to perform Reduced Vertical Separations Minimum 'RVSM' and Pitot Static FAR 91.411 and/or FAR 43 Appendix E.
- Product From Hydramotion Ltd.
Portable and online viscosity measurement instrumentation that is easy to operate and quick to clean, requiring no accessories or recalibration.
- Product From Olympus NDT
Olympus, a world leader in nondestructive testing technologies, introduces the new Corrosion Module software that is now available with the portable EPOCH 600 Ultrasonic Flaw Detector. The Corrosion Module is designed for the growing population of inspectors that require both flaw detection and corrosion measurement solutions as standard application offerings. This optional software provides simplified instrument operation for basic corrosion applications, requiring less set up time and more efficient data collection.
- Product From Deltic Group Inc., The
"Purge Air" aircraft fuel tank rapid purging and venting system can be used to quickly drain residual fuel in tanks, purge and ventilate the tanks, and provide technicians with a supply of breathable air. Available in 3 configurations: cart mounted for hangar use, fitted AKH container, or packaged in 3 flight boxes.
- Product From Karl Storz Industrial-America Inc.
The KARL STORZ Industrial CLICK4MOVE is the next generation in flexible videoscopes intended for technical industrial remote visualization imaging within aviation, aerospace, power generation, and research & development applications. It was ergonomically designed for single hand use for either right- or left-handed operators. Operation is performed using an innovative CLICK4MOVE manual control (unlike a traditional joystick control) providing both tactile and audible feedback when controlling the four-way articulation which is lag free and prohibits over-travel. The videoscopes offer 4 mm and 6 mm outer diameters in several lengths for turbine engine inspections. For more information visit
Spectronics' ONT-365 On-Trak NDT inspection system utilizes powerful UV-A and white light LEDs attached to a mountable platform for maximum flexibility and versatility. It is ideal for use in NDT inspection booths, and for pre-inspections and screening applications requiring maximum uniformity of coverage over a large area. It features four broad-beam lamp heads. Each has three ultra-high-flux UV-A (365nm) LEDs for NDT inspection and one white light LED for general illumination. The system allows inspectors to move the lamp heads anywhere along the tracks so that beam patterns can be made to fit specific needs. Lamp heads can even be added for increased area coverage. For more information call (800) 274-8888 or visit
- Product From Aircraft Tool Supply Company
You don’t have to be told how aggravating it can be to reach down into the cowling to get to those spark plug holes for a quick leakdown check. It’s a real pain to get the hose to reach the spark plug hole without contorting your arm into pretzels. Well, we feel your pain... You don’t have time to waste fighting your tools, Aircraft Tool Supply paired up the ATS 2EM differential pressure tester (with Master Orifice) along with the spark plug port extension tool to make your life a whole lot easier. For more information visit
- Product From Titan Tool Supply Co.
Designed for aviation and ground support equipment maintenance, the Model TTSVS.6 video borescope from Titan Tool is an easy-to-use, 5.7 mm diameter, hand-held inspection instrument featuring two-way articulation (