The Standard Nova system kit is available with three differrent motor housings: .3 hp with 2,800 rpm or 5,000 rpm and .5 hp with 3,200 rpm. Attachments include 90-degree angle head, long reach 90-degree angle head, 45-degree angle head, long reach 45-degree angle head, 360-degree angle head, 90-degree short flat offset angle head, 90-degree medium flat offset angle head, 90-degree long flat offset angle head, 90-degree flat offset angle head, and 90-degree lng reach flat offset angle head. For more information call (800) 423-2764 or visit www.panamericantool.com.
Pneumatic tool kit
- Product From DeWALT
The DEWALT 200 psi Quiet Trim Compressor features a 2.5-gallon tank that delivers 3.0 standard cubic feet per minute (scfm) at 90 pounds per square inch, and is rated to 200 max psi. The ability to deliver both 3.0 scfm and max 200 psi allows the compressor to fire many nails with a quick recovery time. The durable, oil-free pump provides maintenance-free operation. The company has engineered the compressor to have an incredibly low 71.5 dba operating noise level. On top of this, the efficient motor only draws 12 amps, providing easy start-up and reducing the possibility of tripping a breaker.
- Product From Snap-on Industrial
Snap-on Industrial's new Pneumatic Torque Wrenches efficiently and accurately applies torque to fasteners, thanks to a dual speed gearbox and pneumatic technology that controls input air pressure. Sealed housing prevents water, dirt and debris from entering for longer tool life. Variety of high-strength reaction arms available to fit nearly any application. Calibrated prior to shipment according to ISO 17025 and NIST, Cal. Report # 182099A-001. Low vibration eliminates injury caused by repetitive use of impacting wrenches. For more information visit
- Product From Norbar Torque Tools
Norbar is proud to launch the new T-Box and TDMS (Torque Data Management System) software, which together make the complete torque audit system.The T-Box is a hand held and bench mounted torque measuring instrument with a user friendly color touch screen interface. Both hand and powered torque tools can be measured, monitored, and calibrated, and results viewed in graph mode. This comprehensive instrument functions in 12 languages, has all common torque units installed, contains pre-loaded tool calibration templates, and features a large memory for storage of results. The TDMS is PC software designed with a user friendly interface that will enable certificate generation and data archiving for calibration of all types of torque tools.T-Box features a USB interface to a PC where the Torque Data Management System (TDMS) software is installed for archiving of test, calibration, and graphical results. For more information call (866) 667-2272 or visit www.norbar.com.
- Product From Brown Aviation Tool Supply Co.
Air Tool is a family owned business and has been in operation since 1949; its only business is manufacturing pneumatic tools for the aviation industry and all of its products are manufactured in the USA at its Carson City, NV, manufacturing facility. Brown Aviation Tool Supply Co. was founded in 1991 in Oklahoma City, OK, and is one of the largest distributors of specialty aircraft tools in the world. For more information, please call (800) 587-388 or visit www.browntool.com.
- Product From Pan American Tool Corp.
Pan American Tool's pneumatic right angle orbital sander, Part 60-065, features dual action, compact lightweight deign. It has interchangeable 2- or 3-inch hook pads for quick change, free speed 12,000 rpm at 90 psi (max), 1/4-foot air inlet with rear exhaust, and one-year limited warranty. It is precision milled for quiet, smooth operation. For more information visit www.panamericantool.com or call (954) 735-8665.
- Product From Bernard Welding
Bernard Q-Gun MIG guns are designed from the ground up to solve problems, maximize productivity and improve your bottom line. Operators can choose the handle that meets their comfort preference, and choose between a locking trigger, dual pull trigger and dual schedule switch. Q-Gun MIG guns are available with fixed or rotating aluminum necks, feature Jump Liner technology, and come in 150-, 200-, 300-, 400-, 500-, and 600-amp models. They can be used in mixed gas MIG welding applications and are rated at 100 percent duty cycle with CO2 gas. For more information visit www.bernardwelds.com or call (708) 946-2281.
- Product From Jergens, Inc.
ASG Industrial, a division of Jergens Inc., announces an air tool program including CE-certified industrial pneumatic tools for fastening, cutting, finishing and tool storage. Fastening tools include pulse tools, impact wrenches, air ratchets, air hydraulic riveters, blind rivet fasteners, and cordless ratchet and impact tools. Abrasive-related products include air grinders, vacuum sanders, air die grinders, and cordless drills. ASG also offers an assortment of air hose and fitting items, including filters, regulators, lubricators, fittings, couplers, plugs, tube, and hose. Products are ISO:9001 certified. For more information visit www.asg-jergens.com/asgindustrial or call (216) 486-6163.
- Product From LA-MAN Corp.
LA-MAN™s Pneuguard Oiler lubricator improves the performance and service life of pneumatic tools by adding a lubricating oil mist to compressed air lines whenever the tool is in operation. The Pneuguard Oiler is installed with a flexible4 to 6 ft. air hose between it and the air tool, which eliminates the presence of vaporized oil in the exhaust outlet that can turn acidic and attack internal system components. • Accommodates a maximum airflow of 20 SCFM and a maximum pressure of 150 PSIG • Available with a transparent Lexan reservoir to allow visual monitoring of the lubricant level
- Product From EARS North America
The innovative air tool technology that improves productivity, saves energy, and improves workplace health and safety is called the Exhausted Air Recycling System or E.A.R.S. The tool system provides a closed loop between the air compressor and the air tool by capturing the exhausted air from the air tool and returning it to the compressor. This closed-loop system generates more power with less energy. Tests have shown that energy consumption is reduced by nearly 50 percent and noise levels are reduced from 40 to 80 percent over conventional air tools. As an added bonus, the air compressor and the power tools will last longer as the closed-loop system keeps moisture, dust, oil and other pollutants out of the compressor and air tools. And, the work environment is noticeably improved because moisture and dust particles are not blown around the shop. For more information call (847) 356-3220.