Solvent Kleene offers nonhazardous aircraft paint strippers, for spray/brush on, and immersion stripping. Products include nonhazardous degreasers, nonhazmat solvent based, and Ph neutral surfactant based. Products contain no hazardous components, nonozone depleters, or non-HAP. High performance products meet military specs, as well as Boeing specs, and are U.S. Air Force approved. For more information visit www.solventkleene.com.
Aircraft paint strippers
From Solvent Kleene Inc.
-
Product From Solvent Kleene Inc.
-
-
Expand for more details on this Product
- Product From Solvent Kleene Inc.
-
D-Zolve 15-33 R is a high viscosity aircraft paint stripper and remover designed to serve as a safe replacement for hazardous methylene chloride-based strippers. It is noncarcinogenic, nonflammable, nonacidic, and contains no peroxides, chlorinated, or hydrogen embrittling components. It has minimal or no hazardous air pollution potential. Developed for use with spray equipment or for brush on application, D-Zolve 15-33 R provides superior performance in removing several layers of aircraft paints consisting of epoxy primer with cross-linked polyurethane top coats including MIL P23377 Epoxy or TTP 2760 Flexible Polyurethane and MIL C85285 Polyurethane topcoat, Fluid Resistant BMS10-11-V Type 1, BMS 10-60-H, BMS 10-7-9 and Desothane 6221T. It also removes topcoats with high solid content fluoride and other high solid content polyurethanes. D-Zolve 15-33 R penetrates aircraft paints to break the bond between the substrate and the paint primer. Once this bond is broken, a secondary action causes the paint to lift away from the substrate as a single film primer and top coat. It fully conforms to Boeing D6-17487M and to T.O. 1-1-8 including sandwich corrosion tests, immersion corrosion tests, hydrogen embrittlement tests, and more. It is U.S. Air Force approved. It can be safely used with aluminum, magnesium, stainless steel, carbon steel, cadmium coated steel, and titanium. Available in 5-gallon pails, 55-gallon drums, and 275-gallon totes. For more information visit
- Product From Sponge-Jet Inc.
-
As a leading supplier of sponge media abrasives to the aerospace and aviation industry, Sponge-Jet Inc.™s innovative stripping process offers clean, dry, low dust, reusable surface preparation products. Selectively strip coatings from aluminum or composite skins and airframes without damage to the substrate. Safely clean, strip or profile in small, confined spaces. Use as a dry, non-hazardous alternative to chemicals and conduct spot maintenance without extensive setup or cleanup. For more information call (800) 776-6435 or visit www.spongejet.com.
-
Urethane primer/sanding surfacer
Product From Sherwin-Williams Aerospace Coatings -
Sherwin-Williams Aerospace Coatings now offers a urethane primer and sanding surfacer. It provides production time savings opportunities as it can double as either a traditional sanding surfacer or as a primer. MROs and paint shops can now use one product for two purposes and will see increased benefits because it dries twice as fast as traditional epoxy surfacer technology. This latest primer/surfacer is a high performance, corrosion inhibitive urethane primer that contains no hexavalent chromium. Offering outstanding sandability, it meets lower VOC levels versus comparable aerospace MRO products while still providing a very high square foot of coverage per gallon. For more information call (888) 888-5593 or visit
- Product From Larson Electronics
-
Larson Electronics Magnalight adds the EPL-48-2L-T8HO explosion proof paint spray booth light to its line of hazardous area lighting. The 4-foot two-lamp Class 1 and Class 2 Division 1 fluorescent light is used for manufacturing and coating applications because of its T6 temperature and paint spray booth certification. The T8HO bulb option complements the T12HO, T5HO, T8, and LED options available for the EPL-48-2L series. The cast aluminum fixture is made in the USA and encapsulates each fluorescent lamp within a Pyrex tube. The cast aluminum ballast box encloses the T8HO ballast and the fixture can be pendant or surface mounted. It comes with mounting brackets and lamps. A variety of accessories including the polycarbonate overspray shield and stainless steel wire guard is available. For more information visit
- Product
-
3M's line includes 3M Value Masking Tape 101+ for basic jobs such as marking, temporarily holding, wrapping, and sealing; 3M General Use Masking Tape 201+ that’s tough enough for everyday jobs like bundling, labeling, and identifying; 3M Performance Yellow Masking Tape 301+ for industrial paint masking, bundling, color coding, and sealing; 3M High Performance Green Masking Tape 401+/233+ for high performance industrial painting of aircraft, buses, trailers, trucks, boats, trains, and other specialty vehicles; and 3M Specialty High Temperature Masking Tape 501+ for the highest degree of industrial performance in high temperature paint baking applications. For more information visit
- Product From Alliance Coatings Inc.
-
Expect the best for corrosion control while reducing your cost. The KwikKit from Alliance Coatings delivers the right amount of a two-component primer/topcoat required for most corrosion control jobs. It is 100 percent self-contained and disposable. It is available in 595C colors. Sunmight Abrasives offer outstanding performace while maintaining a budget. For more information call (800) 596-9191 or visit
- Product From Walter Surface Technologies
-
Walter Surface Technologies (WST) has developed an eco-friendly solution for heavy-duty industrial cleaning. Nature Boost is a new additive derived from vegetable extracts exclusive to Bio-Circle Environmental Solutions. This new ingredient is obtained from a byproduct generated in the vegetable processing industry. This unique raw material has excellent solubility of oils, greases, inks, adhesives, and even paint, thus making it a very attractive alternative to traditional petroleum based solvents. It is not flammable, does not emit volatile organic compounds, is nontoxic and bio-renewable. The products include CB 100 for bulk cleaning and degreasing; GS 200 for removing glue, ink, paint, sealant, and wax from metallic surfaces; and Bio-Circle ULTRA for removing crude oil, bitumen, and heavy-grease. For more inforamtion visit www.walter.com.
- Product From Mirandy Products Ltd.
-
Mirandy Products Ltd. is proud to provide Mirabowl Q and QC to Air Mobility Command and other military customers. These products offer the ultimate in-flight lavatory odor control. Mirandy also has maintenance products for all your basic needs. Look up all of its products in the GSA Advantage catalog.
- Product From PPG Aerospace
-
PPG Industries’ aerospace coatings group has developed a “green” selectively strippable coatings system for Airbus Military A330 Multi-Role Tanker Transport jets ordered by the U.K. Royal Air Force under the Future Strategic Transport Aircraft (FSTA) program that combines application and performance benefits with reduced repainting time and associated costs. PPG selectively strippable coatings systems simplify coatings removal and reapplication during repainting. The topcoat and intermediate coat are easily removed, and the primer is left intact. The aircraft is washed, and the intermediate coat and topcoat are reapplied. The system typically shortens the strip-and-repaint cycle by up to two days for this type of aircraft, according to the company. For more information visit
- Product From Solvent Kleene Inc.
-
U.S. Air Force approved D-Zolve™ 15-33 LO Paint Stripper available from Solvent Kleene, Inc. is designed to safely remove several layers of aircraft paint. It efficiently removes epoxy primer with cross-linked polyurethane top coats including MIL P23377 Epoxy or TTP 2760 Flexible Polyurethane and MIL C85285 Polyurethane topcoat, Fluid Resistant BMS 10-11-V Type 1, BMS 10-60-H, BMS 10-7-9 and Desothane 6221T. It also removes topcoats with high solid content fluoride and other high solid content polyurethanes. D-Zolve fully conforms to Boeing D6-17487M and to T.O. 1-1-8 including sandwich corrosion tests, immersion corrosion tests, hydrogen embrittlement tests and more. D-Zolve can be safely used with aluminum, magnesium, stainless steel, carbon steel, cadmium coated steel, and titanium. It contains no chlorinated components or other carcinogens. It has no hydrogen embrittling components, no peroxides, and is nonacidic. D-Zolve GL 15-33 exhibits a long active life and slow rate of evaporation and excellent clinging properties even on vertical surfaces and the undersides of wings and fuselage. It can be easily sprayed using an airless spraying system, or applied with a brush and smoothed out with a plastic spatula. D-Zolve GL 15-33 is also available for tank immersion stripping. Designed to minimize health and environmental risks, D-Zolve GL 15-33 is noncarcinogenic, nonflammable, nonacidic, and contains no chlorinated components. It has minimal or no hazardous air pollution potential and is designed to serve as a high performance, safe replacement for methylene chloride that does not structurally degrade aircraft metals. For more information visit