ED-400M eddy current test instrument

ED-400M eddy current test instrument

ED-400M eddy current test instrument Product Image

The Model ED-400M Eddy Current Test Instrument determines and locates cracks and flaws faster more economically and environmentally safer than magnetic particle inspection. It is a self-contained electronic instrument that offers exceptional sensitivity, making it ideal for quick, reliable crack detection.  Setting up and operating the ED-400M could hardly be easier.  Once the probe is electronically balanced, the operator slides the probe over the inspection piece, keeping an eye on the easy-to-read meter. The meter needle then deflects, pinpointing the location of the flaw. Audio and visual alarms can also be set to alert the operator. Unlike other eddy current instruments, it is not affected by changes in background magnetic permeability.  Thus, the tester requires no adjustment when inspecting for defects through surface rust, oxides, paint or other coatings. In addition, minor movements in probe alignment during inspection do not seriously affect the meter reading. With applications ranging from weld inspection and maintenance to receiving inspections and process control, it is widely used to compliment or replace magnetic particle inspection methods. It measures 5” high x 9” wide x 6” deep and weighs 5.3 pounds. For more information visit www.centurionndt.com or call (630) 736-5500.

Expand for more details on this Product

Eddy current conductivity meter

Product From ETher NDE

ETher NDE Ltd. offers the SigmaCheck Eddy Current Conductivity Meter. The SigmaCheck is designed to provide the user with fast and accurate conductivity measurements at a reasonable price. It is extremely easy to use making it suitable for use by shop inspectors or engineers. It meets the requirements for conductivity measurements in the aircraft manufacture and maintenance fields where conductivity measurements are used to verify proper alloy/temper or detect heat damaged components. The SigmaCheck has a large, color, LCD display that is easily seen in all lighting conditions. It is easy to hand-hold due a sculpted housing designed to fit in your hand and a convenient size and weight; only ¾ of a pound (350g.) and measuring less than 6 ½” tall x 3 ¼” wide x 1” thick (163x80x25mm). A removable, silicon rubber boot is included to protect the instrument in rough environments. It comes with a carry case, a dual calibration block, probe cable, charger, USB lead, removable desk stand, and user manual. For more information visit www.ethernde.com.

Get Info Now

Probes

Product From ETher NDE

ETher NDE offer a full range of probes and have an extensive catalogue to help you find the probe you need.

We also specialise in application specific probe design to fit your needs. Teamed with the ability to speak directly to the right person for your probe design, ETher NDE can offer you the best in probe design, in a timely manner.

Get Info Now

Vantage eddy current flaw detector

Product From ETher NDE

The VANTAGE is EThers’ first handheld and fully featured eddy current flaw detector, which allows true single hand operation, leaving the operator free to use the other hand to scan with a probe.

The color display screen is 320 x 240 pixels providing excellent resolution aiding accurate and rapid defect interpretation. The user interface incorporates a simple sidebar menu allowing direct access to key instrument parameters and yet can be instantly switched to “full-­screen mode.” The menu system is intuitive and any experienced eddy current operator will quickly be comfortable with use of the instrument.

Get Info Now

Fischer Conductivity Standards

Product From Fischer Technology, Inc.

Fischer Technology, Inc. offers new conductivity standards or the re-certification of existing conductivity standards. Certified standards are available for the entire conductivity range traceable to internationally recognized calibration standards. Sets of 3 or 5 standards are available for purchase or individual standards may also be purchased based on specific requirements.

Get Info Now

Eddy current inspection(2)

Product From Praxair Surface Technologies

Praxair offers approved NDT on Pratt & Whitney JT8D fan hub assembly per AD 2002-17-02 and AD 2002-13-09 for newly enhanced inspection procedures. The process includes automated eddy current inspection of blade slots, tierods, and counterweight holes. Source approved shot peen repair. Praxair is the source for assembly, balance, and tag on JT8D fan hubs. For more information visit www.praxair.com or call (816) 556-4651.

Get Info Now

Ultrasonic Diagnostic Tool

Product From Spectronics Corporation

Spectronics Corp. has introduced the MDE-2000NC Marksman II, an ultrasonic diagnostic tool that converts and amplifies inaudible ultrasonic sound into audible “natural” sound. This highly advanced tool allows the technician to “hear” even the smallest compressed air, natural gas, propane tank, vacuum, steam, and other pressurized leaks … before they lead to major breakdowns. The receiver converts inaudible ultrasonic sound into audible sound using heterodyne circuitry. Then, its unique Sound Signature Technology finetunes the audible sound into the natural sound emitted by the leak itself. A 5-LED signal intensity indicator and audible alarm pinpoint the exact source of the problem. An Internal Noise Control (INC) feature safeguards against ambient noise. For more information visit

Get Info Now

ECT Inspection System

Product From UniWest

In response to customer interest in a lower-cost, limited-feature, eddy current testing system for jet engine components weighing up to 30 pounds, NDT innovator, UniWest, has developed a new tabletop, 3-axis, semi

Get Info Now

Spark Plug Cleaner and Tester

Product From Aircraft Tool Supply Company

The ATS Spark Plug Cleaner and Tester is the perfect choice for anyone who needs to reliably and accurately check the quality of used spark plugs. Aircraft Tool Supply is the sole distributor of this highly efficient product. Recently, they have equipped the cleaner and tester with both 120- and 220-volt sources and advanced circuitry to prevent thermal overload during heavier use. The cleaner section uses a powerful blast of air and abrasive to thoroughly remove carbon deposits from plugs. The recessed observation mirror is perfectly angled to display the electrode of the spark plug so that you can clearly judge the quality of the spark as the plug is being tested. For more information visit

Get Info Now

UV Leak Detection Kit

Product From Spectroline

The Spectroline MLK-35A MAXIMA Leak Detection UV Kit pinpoints the exact source of leaks in hydraulic, engine oil, and aircraft fuel systems. The kit features the super-powerful MAXIMA ultraviolet lamp and an 8-ounce (237 ml) bottle of Aero-Brite universal fluorescent dye, which locates all leaks in petroleum- and synthetic-based aviation fluid systems. The lamp’s state-of-the-art Micro Discharge Light (MDL) technology delivers up to 10 times the UV-A output of conventional High Intensity Discharge (HID) lamps. It is so powerful that it can be used in direct sunlight. This makes it ideal for outdoor inspections on tarmacs and in open hangars. For more information call (800) 274-8888 or visit 

Get Info Now

Advanced Composite Training

Product From Abaris Training Resources Inc.

Abaris Training is the world leader in advanced composite training, having served both military and commercial customers for more than 30 years. It offers more than 26 intensive short-courses in engineering, manufacturing and repair related subjects. It claims: “We provide a semester’s worth of education in a five-day class.” You can take courses at one of its four facilities, or it can bring the training to you! For more information visit

Get Info Now