Habco has been in development of a 40-inch off aircraft tire cage. This is a one of a kind unit, built on the same design as Habco's other four cages. The design is the only U.S. Army tested and approved aircraft tire cage available. The tire cages exceed the requirements and have proven to save life and limb. Don't leave safety to chance. Even though the probability of a tire failure is low, the consequences are severe and fatal. The risk factor is too high to choose an inadequate tire cage. For more information visit www.habco.biz or call (860) 430-5104.
Tire inflation cage
From HABCO Industries
- Product From Start Pac/Rotorcraft Enterprises LLC
A patent pending eco-friendly aircraft ground power unit that uses up to 75 percent less fuel than traditional equipment has been launched by leading global ground support manufacturer, Start Pac. Start Pac’s new lithium 26V hybrid ground power unit, the Hi-Brd 3 GPU, is one of the few units that meets current Tier IV EPA emissions standards. It is available in two models:The unique self-propelled version, which makes it simple and easy to maneuver for shorter distances as well as towable for longer distances and the Rover, which is an electric cart mounted drivable unit for longer distances that can also tow luggage and lav carts. The Hi-Brd 3 GPU also runs much more quietly and efficiently than traditional equipment and the simple easy to use key ignition allows for fast on the job training and operation. The unit is also equipped with a built-in battery warmer and charger.
- Product From Cygnus Business Media
For more than two decades, Ground Support Worldwide has been the leading publication for the aviation ground support community with an international circulation of 17,000.
And now, we’ve just published our first digital-only magazine,
- Product From Aircraft Tool Supply Company
Looking for an easier way to accomplish bending sheet metal? Tired of your homemade bender brake not working? Consider a bench bender brake from Aircraft Tool Supply for an efficient and cost-effective method to getting your jobs done correctly. Aircraft Tool Supply's bench bender brake comes in three bending length sizes (18, 24, and 36 inches). These convenient problem solvers will bend up to .40-inch (18ga) aluminum sheets to any angle up to 135 degrees. Included with the unit are two "C" clamps to hold down your sheet metal. Make bending metal easy with the ATS bench bender. For more information visit
- Product From Hobart Ground Systems
ITW Global GSE, a division of GSE Holdings Inc, an ITW company, announces the upcoming release of the Hobart PoWerMaster® 2400, the next generation of 400 Hz solid state frequency converters ideal for all types of aircraft. The Hobart PoWerMaster
- Product From KAFKO International
The new Oil Eater Tuff Rug from Kafko International provides the long-wearing durability needed for high traffic areas, including forklift aisles and walkways in warehouses and manufacturing plants.
- Product From HBD/Thermoid,Inc. - A Subsidiary Of HBD Industries, Inc.
For more than 90 years, Aeroduct ® Hose/Ducting have been standard products used by ground personnel worldwide. Aeroduct ® Jet Starter Hose is designed for wide temperature ranges (+500 degrees F to -80 degrees F), easily handled by one person, offers high burst strength (+400 PSI), resists abrasion, fuel and mildew.
- Product From Tronair Inc.
Tronair offers state and engine driven ground power units that supply 28.5V DC in rugged, compact, maneuverable units. The diesel or Jet A fuel unit produces 800 amps continuous and 2,000 amps peak. The gasoline unit meets California Clean Air standards and produces 150 amps continuous and 1,000 amps peak.
- Product From Sage Parts Inc.
You simply cannot find a better line of layflat ducting. Choose from three designs, each engineered for uncompromised quality and performance. Economy PCA layflat ducting features sewn construction collapsible blower tubing for demanding positive pressure applications. UltraLyte™ PCA layflat ducting provides the dual benefits of lightweight convenience and heavy-duty performance to withstand highly rigorous ramp requirements. Premium heat-sealed (welded) PCA layflat ducting features unique spiral construction for reduced fatigue and unbeatable service life.
- Product From Sage Parts Inc.
Engineered best to perform best. Patented non-metallic design with lightweight high-impact polyethylene and amorphous nylon construction for unmatched durability and safety. Resists corrosion and virtually eliminates dangerous rough edges that are common with metal adaptors as they drag along the ground. Fits any aircraft, attaches instantly. Airtight fit, will not shake loose. Maintenance-free, never needs paint, will not dent. Withstands hot and cold temperature extremes. Available in all sizes for every need.
- Product From Thomas & Betts
The Hazlux line of hazardous location lighting from Thomas & Betts now includes the XFM and DFP Series linear fluorescent fixtures, which both provide installation at various angles. The XFM Series, designed for explosive atmosphere locations, features five different ½-inch NPT hub entries on each end and provides installers with options for various lighting angles. The DFP Industrial Series, designed for hazardous locations in industrial and wet environments (Class I, Div. 2), features optional mounting brackets that enable precise aiming in multiple angles. For more information call (800) 238-5000 or visit