In response to increased findings of deposit buildup in aircraft engines that cause internal problems, SkyGeek stocks TheCanKey products, a turbine oil can opener and a dust cap that keep oil cans free of foreign object damage (FOD). As the only safe oil can opener on the market, it is made of reinforced durable plastic and is designed to safely open a 1-quart can of oil. This opener has been tested and approved by Saybolt Laboratories, a company that offers testing and inspection services with Petroleum and Petrochemical sectors as their specialty. It promises to not leave any fragments of the opener or the can in the oil. The ergonomic design and nonslip surface make it comfortable and easy to use, while its plastic material allows it past any airport security checkpoint. It protects your oil cans from floating dust and dirt that would normally settle in the oil. It is easy to secure on top of the can and covers it completely for full protection. The dust cap can be removed and reused easily, and also fits well over new oil cans to keep them clean until use. For more information call (888) 759-4335 or visit www.SkyGeek.com/turbine-oil-can-opener.html.
TheCanKey turbine oil can opener
- Product From Cygnus Business Media
For more than two decades, Ground Support Worldwide has been the leading publication for the aviation ground support community with an international circulation of 17,000.
And now, we’ve just published our first digital-only magazine,
- Product From Aircraft Tool Supply Company
Looking for an easier way to accomplish bending sheet metal? Tired of your homemade bender brake not working? Consider a bench bender brake from Aircraft Tool Supply for an efficient and cost-effective method to getting your jobs done correctly. Aircraft Tool Supply's bench bender brake comes in three bending length sizes (18, 24, and 36 inches). These convenient problem solvers will bend up to .40-inch (18ga) aluminum sheets to any angle up to 135 degrees. Included with the unit are two "C" clamps to hold down your sheet metal. Make bending metal easy with the ATS bench bender. For more information visit
- Product From KAFKO International
The new Oil Eater Tuff Rug from Kafko International provides the long-wearing durability needed for high traffic areas, including forklift aisles and walkways in warehouses and manufacturing plants.
- Product From Thomas & Betts
The Hazlux line of hazardous location lighting from Thomas & Betts now includes the XFM and DFP Series linear fluorescent fixtures, which both provide installation at various angles. The XFM Series, designed for explosive atmosphere locations, features five different ½-inch NPT hub entries on each end and provides installers with options for various lighting angles. The DFP Industrial Series, designed for hazardous locations in industrial and wet environments (Class I, Div. 2), features optional mounting brackets that enable precise aiming in multiple angles. For more information call (800) 238-5000 or visit
- Product From Kaeser Compressors
The AS series of rotary screw compressors are now available. These units deliver the "built-for-a-lifetime" reliability, simple maintenance, and sustainable energy savings you expect from the Kaeser name and are available in 20, 25, and 30 hp with flows from 64 - 143 cfm and pressures to 217 psig. The AS series features a new airend specifically designed to optimize performance and efficiency. Maintenance accessibility has also been improved. The units' new compact design and two large hinged service doors make it possible to service the unit from one side. For more information visit
- Product From Bondhus Corp.
Bondhus "ClickSet" screwdrivers offer an economical solution to the problem of stripped screws and damaged carbide inserts. The screwdriver handles are available in 10 standard pre-set torque levels ranging from 4.4. (.5NM) to 31 inch-pounds (3.5NM). Interchangeable blades covering sizes T5-T15, 1.5 mm to 3 mm and .050 to 1/8 inch allow the tool user to custom match the desired torque limiting level with the tool tip. When the pre-set torque level is reached, the mechanism slips and makes an audible
- Product From Hannay Reels Inc.
Hannay Reels 6000 Series manual or power rewind heavy-duty hose reel is designed for aviation applications including portable water transfer, hangar operations, and fire protection. With a durable construction and finish, this series can stand up to any environment. Handling 1/2-inch through 1-inch I.D. hose, the 6000 Series crank rewind reel is supplied with a pinion brake, while a power rewind reel includes a comet brake. Its standard inlet is equipped with a 90-degree ball bearing swivel joint with 1-inch female NPT threads and the standard outlet with 1-inch female NPT threads, which are all constructed from steel. This model accommodates pressures up to 2,000 psi and temperatures from 60 F to +250 F (-51 C to +121 C).
- Product From Herkules Equipment Corporation
Herkules Equipment Corp.’s Vise & Grinder Stands offer any workshop more flexibility on the placement of either a vise or a grinder within their facility. The stand can swivel up to 360 degrees and locks into position, allowing the vise or grinder to be placed in the most ideal position for the task, and then moved back out of the way when not in use.
- Product From Temple Allen Industries
Working closely with our European launch customer, Temple Allen has developed a pneumatic low-vibration sanding tool for wing-top sanding operations. An advanced prototype, shown here, incorporates ergonomic handles, a dual-inline sanding head, a vibration-absorbing boom, and an optional fluid delivery system. Production systems will offer, like our EMMA systems, an interchangeable selection of end effectors to accommodate different pad sizes and orbits for task-specific requirements; an integrated dust collection system which turns on with the sander and routes particulate to HEPA-rated 3M Clean Sanding Filter Bags. Temple Allen's new Wing-Top Sander is patent pending, and has been CE-certified for the European market. For more information visit
- Product From Temple Allen Industries
During MRO, helicopter blades are a challenge to sand because the paint thickness on rotor blades varies along the surface (especially considering the frequency of field repairs); because the substrate (and copper grid/ lightning protection) is susceptible to damage, and because the topcoat (particularly CARC paint used in some military applications) is hard enough to survive extreme operating conditions. Temple Allen’s solution focuses on finish quality (consistent scratch depth/pattern) and part protection - by holding the sander flat while applying even pressure to the workpiece, operators are able to dial in a desired contact force and thereby establish a predictable material removal rate which, among many advantages, allows different operators to generate the same high-quality results. For more information visit