EZ TorQ II torque tester

EZ TorQ II torque tester

EZ TorQ II torque tester Product Image

Mountz Inc. offers the EZ-TorQ torque tester, a cost-effective calibration tester used to verify and calibrate hand and power tools. It is a simple to use torque tester that features a built-in transducer and graphics display. The tool is ideal for all small hand torque and non-impacting torque power tools. It can calibrate hand torque screwdrivers and wrenches as well as power tools to avoid overtightening problems such as stripped fasteners and parts, under or overtorque tightening problems, which can increase liability and risk of recall. Tools should be calibrated and checked on an interval program governed by an effective quality management system. Process improvement is possible by periodically verifying a tools performance between intervals to determine whether torque tools are operating at their proper settings. Many tools don't have a locking device, and users may easily change their torque settings. Tools can be dropped or damaged between established intervals, which could effect their calibration. Verification testing is an important strategy to ensure tools are within the desired specification. Effective use of a torque analyzer is a fast and reliable method of calibrating torque tools to their proper settings or verifying the setting is still valid. For more information visit www.mountztorque.com or www.etorque.com.

Expand for more details on this Product

Ultraviolet Inspection Light

Product From Maxxeon Inc.

Maxxeon Inc. has designed a new UV inspection light for non-destructive testing (NDT) that combines cordless portability with performance that exceeds ASTM E2297 requirements for intensity. WorkStar 2003

Get Info Now

Ground Service Provider App

Product From Cygnus Business Media

For more than two decades, Ground Support Worldwide has been the leading publication for the aviation ground support community with an international circulation of 17,000.

And now, we’ve just published our first digital-only magazine, 

Get Info Now

Bench Bender Brake

Product From Aircraft Tool Supply Company

Looking for an easier way to accomplish bending sheet metal? Tired of your homemade bender brake not working? Consider a bench bender brake from Aircraft Tool Supply for an efficient and cost-effective method to getting your jobs done correctly. Aircraft Tool Supply's bench bender brake comes in three bending length sizes (18, 24, and 36 inches). These convenient problem solvers will bend up to .40-inch (18ga) aluminum sheets to any angle up to 135 degrees. Included with the unit are two "C" clamps to hold down your sheet metal. Make bending metal easy with the ATS bench bender. For more information visit 

Get Info Now

Tuff Rug Resilient In High-Traffic Areas

Product From KAFKO International

The new Oil Eater Tuff Rug from Kafko International provides the long-wearing durability needed for high traffic areas, including forklift aisles and walkways in warehouses and manufacturing plants.

Get Info Now

Linear Fluorescent Lighting

Product From Thomas & Betts

The Hazlux line of hazardous location lighting from Thomas & Betts now includes the XFM and DFP Series linear fluorescent fixtures, which both provide installation at various angles. The XFM Series, designed for explosive atmosphere locations, features five different ½-inch NPT hub entries on each end and provides installers with options for various lighting angles. The DFP Industrial Series, designed for hazardous locations in industrial and wet environments (Class I, Div. 2), features optional mounting brackets that enable precise aiming in multiple angles. For more information call (800) 238-5000 or visit

Get Info Now

Rotary Screw Compressors

Product From Kaeser Compressors

The AS series of rotary screw compressors are now available. These units deliver the "built-for-a-lifetime" reliability, simple maintenance, and sustainable energy savings you expect from the Kaeser name and are available in 20, 25, and 30 hp with flows from 64 - 143 cfm and pressures to 217 psig. The AS series features a new airend specifically designed to optimize performance and efficiency. Maintenance accessibility has also been improved. The units' new compact design and two large hinged service doors make it possible to service the unit from one side. For more information visit

Get Info Now

Ultrasonic Diagnostic Tool

Product From Spectronics Corporation

Spectronics Corp. has introduced the MDE-2000NC Marksman II, an ultrasonic diagnostic tool that converts and amplifies inaudible ultrasonic sound into audible “natural” sound. This highly advanced tool allows the technician to “hear” even the smallest compressed air, natural gas, propane tank, vacuum, steam, and other pressurized leaks … before they lead to major breakdowns. The receiver converts inaudible ultrasonic sound into audible sound using heterodyne circuitry. Then, its unique Sound Signature Technology finetunes the audible sound into the natural sound emitted by the leak itself. A 5-LED signal intensity indicator and audible alarm pinpoint the exact source of the problem. An Internal Noise Control (INC) feature safeguards against ambient noise. For more information visit

Get Info Now

Torque Limiting Screwdriver

Product From Bondhus Corp.

Bondhus "ClickSet" screwdrivers offer an economical solution to the problem of stripped screws and damaged carbide inserts. The screwdriver handles are available in 10 standard pre-set torque levels ranging from 4.4. (.5NM) to 31 inch-pounds (3.5NM). Interchangeable blades covering sizes T5-T15, 1.5 mm to 3 mm and .050 to 1/8 inch allow the tool user to custom match the desired torque limiting level with the tool tip. When the pre-set torque level is reached, the mechanism slips and makes an audible

Get Info Now

ECT Inspection System

Product From UniWest

In response to customer interest in a lower-cost, limited-feature, eddy current testing system for jet engine components weighing up to 30 pounds, NDT innovator, UniWest, has developed a new tabletop, 3-axis, semi

Get Info Now

Heavy-duty Hose Reel

Product From Hannay Reels Inc.

Hannay Reels 6000 Series manual or power rewind heavy-duty hose reel is designed for aviation applications including portable water transfer, hangar operations, and fire protection. With a durable construction and finish, this series can stand up to any environment. Handling 1/2-inch through 1-inch I.D. hose, the 6000 Series crank rewind reel is supplied with a pinion brake, while a power rewind reel includes a comet brake. Its standard inlet is equipped with a 90-degree ball bearing swivel joint with 1-inch female NPT threads and the standard outlet with 1-inch female NPT threads, which are all constructed from steel. This model accommodates pressures up to 2,000 psi and temperatures from 60 F to +250 F (-51 C to +121 C). 

Get Info Now