High pressure pump

High pressure pump Product From Hotsy Corporation: Hotsy introduces high-pressure pumps now feature NESTechnology -- nested seal technology -- where the pump actually "nests" the seals of the pump's high-pressure packing assembly in place, supporting the side walls. The nesting assembly includes high- and low-pressure U-shaped seals surrounded by thicker brass pressure rings. For more information call (800) 525-1976 or visit www.hotsy.com/hotsy-pump.aspx.; Expand for more details on this Product

Pump repair kit Product From Viking Pump: Viking Pumps are designed to be easy to repair, and that process is even simpler with genuine repair parts kits, which are now available for most standard Viking pumps. Two kits are available for each size and material of pump. Seal Kits include everything needed to do a complete seal and bearing replacement, including the shaft seal, O-rings, gaskets, seal lubricant, bearings, and bearing housing hardware. Rebuild Kits include parts commonly needed for a complete wet-end rebuild, including an idler and bushing, head and pin assembly, bracket or casing bushing, and fasteners. Each kit includes an exploded diagram and parts lists, with a link to the pump’s technical service manual. For more information call (319) 266-1741 or visit

Interfill Product From Lufthansa Technik Intercoat GmbH: Interfill® is the key component of the Advanced Epoxy Repair Process. It is an airworthiness approved material, which not only restores components to servicability, but endows them with better wear characteristics than the original surface. This results in an improved performance of the complete assembly or system, while the base material properties remain unaffected even after repeated application.

Rapco dry air pumps Product From Rapco Inc.: Rapco dry air pumps now have an inspection port. The port is easily accessible on the top of the pump and features the Smart Stick, a go-no go gauge that helps determine pump life. Benefits include longer life and lower cost. Rapco offers technical support and a worldwide distribution network. For more information call (800) 527-2726 or visit www.rapco-rfs.com.

Observer/Operator Seat Product From Aviation Fabricators/AvFab: AvFab’s special missions observer/operator seat articulates up and down, fore and aft to provide maximum comfort for long-duration flights and features a five-point restraint system. Currently STC approved for the USAF’s Beechjet T1A Jayhawk, a special missions operator seat for the Beechcraft King Air 350 is also in development. For more information on this or any other product or service offered by AvFab, please visit

Aerospace structural components Product From Precision Metal Products Inc.: Precision Metal Products Inc. (PMP) produces close-tolerance net and near-net shaped forgings and machined components for military and commercial aviation and U.S. Defense applications. PMP forges complex military aircraft parts such missile fins, aircraft airfoils, structural components, and helicopter parts. PMP is certified as a quality manufacturing company by BSI, ISO 9001:2000 and is a registered U.S. military government supplier. For details on its military product production capabilities, visit

Aviation ducting and hose products Product From HBD/Thermoid Inc. - A Subsidiary of HBD Industries Inc.: HBD/Thermoid Inc. is an approved QPL source for hose/rubber products required by the U.S. Department of Defense. Aeroduct Jet Starter Hose with Scuffer Jackets is designed for temperatures from +500 F to -80 F. Easily handled by one person, this hose provides high burst strength (+400 psi), resists abrasion, solvents, fuel, and mildew. For more information call (800) 543-8070 or visit

Aircraft seating Product From ARCONAS: Bernù is the most contemporary line from Arconas. Available with curved or straight beams, this finely crafted product can be configured to create dynamic, inviting seating areas. The aeronautically inspired design is sharp and modern, and seating is available with a selection of finishes and materials. With high-tech design, Bernù is effortless to install and maintain. For more information visit

Precision aviation components Product From California Drop Forge Inc.: California Drop Forge Inc. (CDF) forges lightweight, but extremely strong, metals like titanium into aviation/aerospace components used by the U.S. Armed Forces. This CDF stainless-steel, structural wing support with its protective coating is used on the U.S. Air Force’s C-5 Galaxy Transport. CDF is in compliance with AS 9100, ISO-9000:2001, NADCAP, and is a registered PRI and U.S. military government recognized supplier. For details on California Drop Forge’s forged or machined components, visit

Corrosion control Product From Alliance Coatings Inc.: Expect the best for corrosion control while reducing your cost. The KwikKit from Alliance Coatings delivers the right amount of a two-component primer/topcoat required for most corrosion control jobs. It is 100 percent self-contained and disposable. It is available in 595C colors. Sunmight Abrasives offer outstanding performace while maintaining a budget. For more information call (800) 596-9191 or visit