X-Ray Machine

X-Ray Machine

No image available.
The ISOVOLT Titan E stationary X-ray machine from GE Sensing & Inspection Technologies is based on the field-proven ISOVOLT Titan series and offers improvements in ease of operation, controllability and on-board logic to allow greater operational productivity and reliability. It will find increasing application in meeting the requirements of system integrators for automated X-ray solutions, as well as being used as a stand-alone X-ray machine for conventional X-ray radiography and radioscopy. The new Titan E offers the same high out put of 4.5kW as the existing Titan family, with the same maximum tube current of 45 mA, extremely stable high voltage and very low ripple but this is now supported by a control platform that is more intuitive and easier to use. This is the result of an ergonomic, interactive re-design that features a fully graphic screen that clearly displays all operating and set-up parameters, a dynamic menu guide and a consistent method of operation that permits input through a keyboard, a speed-dependent wheel and function keys. It is complemented by a data-supported programming function for setting-up, archiving, and activating application-specific exposure programs and failsafe operation to meet international standards. System safety has been an important consideration in the re-design and the operating condition of the generator, tube and cable, which are continuously monitored and displayed in accordance with regulatory requirements. Any alarm situations are instantly reported and there is automatic switch-off in the event of lamp failure. Other safety features include dual high voltage contactors with redundancy monitoring, with independent external safety circuits, radiation safety interlock to European and US standards and prevention of unauthorized operation. Cooling water/oil flow rate are also constantly monitored. The Titan E can display text message in 16 languages. For more information visit www.geinspectiontechnologies.com.

Expand for more details on this Product

DXR250V portable digital radiography

Product From GE Sensing & Inspection Technologies

GE Sensing & Inspection Technologies now provides a comprehensive portfolio of imaging plates covering virtually all nondestructive testing (NDT) applications for computed radiography. The new IPU plates offer excellent sharpness and the best probability of detection in the GE portfolio, while maintaining the same high level of productivity. The DXR 250V uses a 200µm pixel pitch detector and has one of the largest active areas at 16 inch x 16 inch (41cm x 41cm). If image retention is required, users can take advantage of long-term storage and archiving of large numbers of digital radiographs. For more information visit www.gesensinginspection.com.

Get Info Now

GE Sensing & Inspection ISOVOLT Titan E x-ray machine

Product From GE Sensing & Inspection Technologies

The ISOVOLT Titan E stationary X-ray machine from GE Sensing & Inspection Technologies is based on the field-proven ISOVOLT Titan series and offers significant improvements in ease of operation, controllability and on-board logic to allow greater operational productivity and reliability. It offers the same high out put of 4.5 kw as the existing Titan family, with the same maximum tube current of 45 mA, extremely stable high voltage and very low ripple but this is now supported by a control platform that is more intuitive and easier to use. This is the result of an ergonomic, interactive re-design that features a fully graphic screen that clearly displays all operating and set-up parameters, a dynamic menu guide and a consistent method of operation that permits input through a keyboard, a speed-dependent wheel and function keys. It is complemented by a data-supported programming function for setting-up, archiving, and activating application-specific exposure programs and failsafe operation to meet international standards. The Titan E, which can display text messages in 16 languages, has been designed for stand-alone operation and for integration in complex inspection systems. For more information visit www.geinspectiontechnologies.com.

Get Info Now

XMB X-ray systems

Product From YXLON International Inc.

XMB X-ray Systems from YXLON are designed for mobile use and suited to many inspection tasks including low density composite materials and aluminum and steel products. • Light weight • All components on one cart • Cart has two tilt positions and an eye hook • High reliability • Easy to use For more information visit www.yxlon.com or call (330) 798-4800.

Get Info Now

Ultrasonic Diagnostic Tool

Product From Spectronics Corporation

Spectronics Corp. has introduced the MDE-2000NC Marksman II, an ultrasonic diagnostic tool that converts and amplifies inaudible ultrasonic sound into audible “natural” sound. This highly advanced tool allows the technician to “hear” even the smallest compressed air, natural gas, propane tank, vacuum, steam, and other pressurized leaks … before they lead to major breakdowns. The receiver converts inaudible ultrasonic sound into audible sound using heterodyne circuitry. Then, its unique Sound Signature Technology finetunes the audible sound into the natural sound emitted by the leak itself. A 5-LED signal intensity indicator and audible alarm pinpoint the exact source of the problem. An Internal Noise Control (INC) feature safeguards against ambient noise. For more information visit

Get Info Now

ECT Inspection System

Product From UniWest

In response to customer interest in a lower-cost, limited-feature, eddy current testing system for jet engine components weighing up to 30 pounds, NDT innovator, UniWest, has developed a new tabletop, 3-axis, semi

Get Info Now

Spark Plug Cleaner and Tester

Product From Aircraft Tool Supply Company

The ATS Spark Plug Cleaner and Tester is the perfect choice for anyone who needs to reliably and accurately check the quality of used spark plugs. Aircraft Tool Supply is the sole distributor of this highly efficient product. Recently, they have equipped the cleaner and tester with both 120- and 220-volt sources and advanced circuitry to prevent thermal overload during heavier use. The cleaner section uses a powerful blast of air and abrasive to thoroughly remove carbon deposits from plugs. The recessed observation mirror is perfectly angled to display the electrode of the spark plug so that you can clearly judge the quality of the spark as the plug is being tested. For more information visit

Get Info Now

UV Leak Detection Kit

Product From Spectroline

The Spectroline MLK-35A MAXIMA Leak Detection UV Kit pinpoints the exact source of leaks in hydraulic, engine oil, and aircraft fuel systems. The kit features the super-powerful MAXIMA ultraviolet lamp and an 8-ounce (237 ml) bottle of Aero-Brite universal fluorescent dye, which locates all leaks in petroleum- and synthetic-based aviation fluid systems. The lamp’s state-of-the-art Micro Discharge Light (MDL) technology delivers up to 10 times the UV-A output of conventional High Intensity Discharge (HID) lamps. It is so powerful that it can be used in direct sunlight. This makes it ideal for outdoor inspections on tarmacs and in open hangars. For more information call (800) 274-8888 or visit 

Get Info Now

Advanced Composite Training

Product From Abaris Training Resources Inc.

Abaris Training is the world leader in advanced composite training, having served both military and commercial customers for more than 30 years. It offers more than 26 intensive short-courses in engineering, manufacturing and repair related subjects. It claims: “We provide a semester’s worth of education in a five-day class.” You can take courses at one of its four facilities, or it can bring the training to you! For more information visit

Get Info Now

Cabin Pressure Tester

Product From Tronair Inc.

The Tronair Cabin Pressure Tester utilizes an external compressed air supply for pressurizing and testing the integrity of the aircraft cabin, door, canopy seal and outflow and safety valves. The compressed air is supplied to a filter/separator through a safety valve, a high flow precision regulator, passed through a flowmeter and then out to the aircraft cabin. The rate of climb indicator allows the operator to monitor the system while pressurizing and depressurizing the aircraft. For more information visit 

Get Info Now

Temperature Control Heat Gun

Product From Master Appliance

Master Appliance’s Proheat STC Surface Temperature Control Heat Gun, Model PH-1600, quickly brings work surface temperatures up to your programmed target, while preventing over or under-heating.  An electronically integrated IR sensor provides continuous surface temperature readings and automatically regulates heat to reach and maintain your target temperature, even with changes in the heat gun’s distance from the work surface. It has high power, temperature and airflow ratings, and dial-in, programmable surface temperatures of 90 F to 500 F. (40 C to 270 C), displayed in 10-degree increments in either Fahrenheit or Celsius. Airflow is adjustable from 4 to 16 cfm. It is ideal for use in manual prepreg lay-up in composite parts manufacturing and rework. For more information call (800) 558-9413 or visit 

Get Info Now