A 10-model series of ergonomic, stringer-less, folding leg work benches offering 2,000-pound capacities is available from The Durham Manufacturing Company. Designed with four heavy-duty gussets for stability, the benches are easy to work on from both sides. Tops are fabricated of 14-gauge steel with formed channel on all four sides. Corners are ground safely smooth. There is a choice of steel or tempered hard board over steel top surfaces. Hinged legs are welded to the tops and can be adjusted in 1-inch increments, from 28- to 42-inch height above floor. Shelves and drawers to fit all models are offered as options. The shelves are 14-gauge steel with 2 1/2-inch backstops which bolt to the cross braces on the legs and are 11 1/4 inches above floor level. Drawers attach to the tops using predrilled holes and open and close smoothly on ball bearing slides. They have recessed handles with locks and two keys. The work benches are available in 10 sizes ranging from 60 inches wide by 30 inches deep to 120 inches wide by 48 inches deep. Setup takes less than 10 minutes and no tools are required. For more information visit www.durhammfg.com or call (800) 243-3774.