Click Bond fasteners
From Click Bond Inc.
-
Product From Click Bond Inc.
-
Click Bond designs and manufactures an array of fasteners optimized for adhesive bonding to structure including: rivetless nutplates, studs, standoffs, brackets, cable tie mounts, sleeves for hole repair/protection, and composite threaded fasteners. It takes pride in assisting manufacturers in the use of bonded fastener technology to improve structural characteristics, extend product life, and streamline manufacturing processes. For more information visit www.clickbond.com or call (775) 885-8000. -
Expand for more details on this Product
-
Filters, hardware, and inspection kits
Product From Global Filtration -
In conjunction with filters, Global Filtration also offers a complete line of inspection kits that will put the entire required o-rings, gaskets, and packings in your hands at 100-, 300-, and 600-hour inspection intervals. It has the complete line of Boeing inspection kits and air filters as well. It has a full line of helicopter filters as well as analysis services for oil, fuel and hydraulic systems. For more information visit www.globalfiltration.com or call (800) 980-2525.
- Product From Master Bond
-
Master Bond EP21TDCS-LO surpasses the existing performance parameters of commercially available, electrically conductive adhesive formulations. This compound has extremely high toughness, high peel strength and exceptionally low volume resistivity. It cures at room temperature and has a convenient one to one mix ratio by weight or volume. EP21TDCS-LO passes NASA low outgassing requirements and is cryogenically serviceable. It has a service operating temperature range of 4 K to 275 degrees F.
- Product From Island Aviation Holdings, Inc
-
CUTTING TOOLS: AIRCRAFT EXT DRILL BITS 6" & 12", JOBBLER DRILL, RIVET SHAVERS & NUTPLATE COUNTERBORES, THREADED SHANK DRILL BITS NAS 965 TYPE B & D NAS 907
- Product From Island Aviation Holdings, Inc
-
C SERIES STANDARD PLIER OPERATED CC
- Product From Island Aviation Holdings, Inc
-
MS20995C ALL SERIES ALUMINUM WIRE-ANODIZED BLUE COPPER WIRE-CADMIUM PLATED MONEL LOCKWIRE INCONEL OXIDIZED INCONEL STAINLESS STEEL C51 C62 C63 C47 C41 C40 C32 C30 C28 C25 C24 C22 C21 C20 C18 C10
-
Fastener Specialty FSIM nut ring
Product From Fastener Specialty Inc. -
Fastener Specialty Inc. offers the FSIM-Series instrument mount nut ring (FAA-PMA #PQ1026SW). Use makes mounting instruments easier and prevents loose hardware from falling into sensitive areas by eliminating "grasshopper clips." Available in standard instrument sizes, kits contain a bracket, mounting screws, and threaded guides. Sizes include 2-1/4-inch and 3-1/8-inch sizes, available in three-point and four-pin mounts. For more information call (972) 988-0064 or visit www.fastenerspecialty.com.
- Product From Fastener Specialty Inc.
-
Fastener Specialty Inc. offers its FSIM-Series instrument mount nut ring (FAA-PMA # PQ1026SW). Aimed at servicing the general aviation and instrument panel market, this item eliminates loose hardware behind the panel. It is quick and easy to install and features lightweight brackets with self-wrenching self-locking press nuts. For more information visit www.fastenerspecialty.com or call (972) 988-0064.
-
Eaton Sure-Mate quick disconnects
Product From Eaton Aerospace Group -
Eaton Corporation™s aerospace business offers Aeroquip brand Sure-Mate self-sealing, thread-together, quick disconnect couplings. They allow for quick, easy, reliable connection and disconnection of lube oil, coolant, and hydraulic lines for civil and military aircraft as well as ground vehicle applications. The design incorporates timed threads, locking fingers, tubular valve and sleeve technology, a flush face design, bonded elastomeric seals, blunt start Acme threads, and a one-piece male half. Sure-Mate couplings meet or exceed SAE AS1709 specifications, are available in titanium and aluminum, can accommodate operating pressures up to 5000 psi (345 bar), and can operate at temperatures ranging from -65 F to 275 F (-54 C to 135 C). For more information visit www.eaton.com.
- Product From Aviation Fabricators/AvFab
-
AvFab’s special missions observer/operator seat articulates up and down, fore and aft to provide maximum comfort for long-duration flights and features a five-point restraint system. Currently STC approved for the USAF’s Beechjet T1A Jayhawk, a special missions operator seat for the Beechcraft King Air 350 is also in development. For more information on this or any other product or service offered by AvFab, please visit
-
Aerospace structural components
Product From Precision Metal Products Inc. -
Precision Metal Products Inc. (PMP) produces close-tolerance net and near-net shaped forgings and machined components for military and commercial aviation and U.S. Defense applications. PMP forges complex military aircraft parts such missile fins, aircraft airfoils, structural components, and helicopter parts. PMP is certified as a quality manufacturing company by BSI, ISO 9001:2000 and is a registered U.S. military government supplier. For details on its military product production capabilities, visit