Landing Gear Handling

Landing Gear Handling

Landing Gear Handling Product Image
Didsbury OMNI ARM offer a revolutionary landing gear changer, transporter and holding unit. This versatile, multi-use tool, facilitates easy removal and installation of NLG and MLG on a wide range of aircraft.

Expand for more details on this Product

Mobile Work Platform

Product From NMC-Wollard Inc.

NMC-WOLLARD Model 704 lifts to 2,000 pounds. (909 kg) distributed loads — up to 500 pounds (227 kg) concentrated loads. Hydraulic stabilizers allow full capacity at full extension. Lever actuated stabilizers deploy for lift, retract for travel. Lift has elevating work platform height to 16 feet (488 cm). Gives workers repair access to most aircraft. Low profile travel mode is only 43 inches (109 cm). 20 mph top speed (32 km/hr.). Has 109.25 square feet (10.15 square meters) platform area. Gives access to broad working areas of wings, tail sections and fuselage without need to reposition unit. Large 216-inch x 88-inch platform (533 cm x 208 cm) is ideal for multiple technicians and power tools. Single scissors lift features heavy-duty, rectangular tubular steel construction. Modular engine/transmission package simplifies maintenance and repair. Choice of four engine packages or electric.

Get Info Now

Scissor Decks Maintenance Stands

Product From Easy Access Industrial Design Inc.

Scissor Decks are spring-assisted manual lift platforms that set up or fold down in seconds. Scissor Decks may be joined together in line or on 90 degree angles for wrap around maintenance applications. Scissor Decks are now available in narrow frame design stands for applications where wheels are not required. Our new engineered single aluminum 2x3 tube frame reduces weight and cost. Angled heavy wall 2x2 legs allow for positioning on most any surface. Like Scissor Deck wheeled units, Scissor Deck stands are available in 4 models with max deck height up to 6 feet 9 inches. The new design stands are recommended for field work where transportation is frequent or for fixed locations where wheels are not needed.

Get Info Now

3D-Gyroscope Leveled Jack

Product From Langa Industrial SA

iJACK (Patented) is a 3D-gyroscope level placed on the aircraft fuselage that sends electrical signals to some visual indicators (one per jack), showing to each hydraulic tripod jack operator the level status of the aircraft and guiding him indicating when each jack needs to be operated . With this device, the aircraft leveling during jacking is continuously monitored, controlled and secured on the maintenance manual mandatory level range. iJACK is universally compatible with all existing and future aircrafts and hydraulic jacks. The added value of this product is based on its simplicity but huge safety and productivity improvements during jacking or weighing & balance operations for MRO. Additional software and integration with laptop / tablets / smartphones is possible for IT data management and recording.

Get Info Now

Rapid Deployment Jack Set

Product From Malabar International

Malabar’s Rapid Deployment Tripod Jack Set can be sent to any location in emergency situations where full service facilities are not available. The four 80-ton jacks are suitable for use on a wide range of aircraft. 

Get Info Now

Vertical Access Platform Attachment

Product From Man Lift Mfg. Co.

No more using ladders or standing on mid-rails, buckets and planks on the platform. SHU facilitates safe, OSHA compliant access to narrow spaces, for example ceiling grids and joists.
SHU safely increases working height and can be used with the rails up or lowered with our fall protection system.

Get Info Now

Scissor Deck Platform

Product From Easy Access Industrial Design Inc.

Scissor Deck Aircraft Maintenance Platforms are lightweight welded aluminum and multi height adjustable. Deck sizes from 4’ to 6’ length, 20” to 40” width with max deck heights to 7’ 5”. Removable handrails, Access deck f

Get Info Now

Tripod, Axle Jacks

Product From Tronair Inc.

Tronair manufactures a full line of quality, OEM approved tripod and axle jacks. The threaded rams of all 5- through 30-ton tripod jacks are equipped with hand wheel safety nuts. Air pumps are available on jacks where they are not standard. Don’t take a chance with any other jack! Always choose the proven reliability of every Tronair jack. For more information visit www.tronair.com.

Get Info Now

Variable Height Engineers' Steps

Product From Semmco Limited

The Variable Height Engineers' Steps are designed for use on A320 and 737 aircraft, mounted on a lightweight, towable chassis is made of aluminium and is fully compliant to EU standards and legislation. An essential feature of this equipment is that it is manuverable and adjustable by one person with two-man safe working load. The height adjustment of the top working platform is from 2.2 meters to 3.2 meters.

Get Info Now

Maintenance Stand

Product From Clyde Machines Inc.

Maintenance Stand features non-slip, self-cleaning steps and platform floor with a 500-pound capacity. Heavy-duty casters and 16-inch solid tires make it easy to move. Upper-platform railings can be lifted out and store below. Mid-platform railings can be easily swung down and out of the way. Platform heights are 57, 75 and 86 inches.

Get Info Now

Government contractor

Product From Terex Government Programs

The Terex Government Program team’s ability to understand and navigate the complex world of government contracting, Federal Acquisition Regulations and Mil Specs, makes it an ideal partner for the U.S. government, its military departments, civilian groups, and contractors. It provides contractor logistic support (CLS) for the U.S. Army MAC 50 program which includes program management, field service technical support and parts supply support. For more information call (540) 361-7755 or email

Get Info Now