The U.S. Army and GE Aviation successfully completed engine test of the first Future Affordable Turbine Engine (FATE), designed to meet a series of aggressive goals including a 35% reduction in specific fuel consumption, 80% improvement in power-to-weight, 20% improvement in design life and 45% reduction in production and maintenance costs relative to currently fielded engines. In addition to increasing hot-and-high payload and performance, the Army is also emphasizing extended range and endurance. The second FATE engine will begin testing early next year.
"We're thrilled with the results from the first FATE full engine test, which completed all primary objectives with more than 40 hours of run time and nearly 1000 steady state and transient data points. This risk-reduction vehicle is a key step in the program towards our final build and performance demonstration," said Harry Nahatis, VP and General Manager of GE Aviation's Turboshaft Engine Department. "From a pure design capability standpoint, the FATE program is the most advanced turboshaft development engine GE has tested in our history, incorporating an extensive use of commercially developed technologies for the next generation of propulsion. We're proud to work with the Army in maturing these breakthrough technologies and we're looking forward to applying our learnings to the second engine test early next year."
The first engine-level test followed the successful completion of FATE compressor, combustor and turbine rig tests. The FATE compressor rig recorded the highest single-spool compressor pressure ratio in GE Aviation's history. The combustor test incorporated GE's most extensive use of ceramic matrix composites (CMCs) in the combustion module, with the CMC combustion dome and liners allowing for unprecedented high-temperature capability and weight reduction for better performance. The FATE turbine rig was built using additive manufacturing techniques for faster construction and lower development costs. These rigs followed FATE inlet particle separator tests completed in 2014. Additionally, the FATE engine demonstrated advanced controls technologies, sensor suite, and algorithms for improved aircraft performance and sustainment needs. These controls advancements are key components of next generation control architectures.
In 2011, GE was competitively awarded the $45 million FATE cost-share program to design a 5,000-10,000 shp class turboshaft engine that demonstrates technologies applicable to existing aircraft and future rotorcraft requirements such as the US Department of Defense's Future Vertical Lift (FVL) program. Likewise, these technologies can be incorporated into new engines including the T901 which GE has offered for the ITEP program, or upgrades to existing engines such as the T700 and T408.
"Between the T408, T901 and FATE programs, we have a unique multigenerational product plan that shares technologies across our military rotorcraft efforts, incorporates commercial engine technologies and fuses them together in a low-risk manner to drive high-performance and affordable engines applicable to both military and commercial aircraft," said Tony Mathis, President of GE Aviation's Military Systems Operation.
GE Aviation, an operating unit of GE (NYSE: GE), is a world-leading provider of jet and turboprop engines, components, integrated digital, avionics, electrical power and mechanical systems for commercial, military, business and general aviation aircraft. GE Aviation has a global service network to support these offerings and is part of the world's Digital Industrial Company with software-defined machines and solutions that are connected, responsive and predictive. For more information, visit us at www.ge.com/aviation. Follow GE Aviation on Twitter at
This research is partially funded by the Government under Agreement No. W911 W6-11-2-0009. The U.S. Government is authorized to reproduce and distribute reprints for Government purposes notwithstanding any copyright notation thereon.
The views and conclusions contained in this document are those of the authors and should not be interpreted as representing the official policies, either expressed or implied, of the Aviation Applied Technology Directorate or the U.S. Government.
AMRDEC is part of the U.S. Army Research, Development and Engineering Command, which has the mission to develop technology and engineering solutions for America's Soldiers. AMRDEC employs nearly 11,000 civilian scientists, researchers and engineers.
RDECOM is a major subordinate command of the U.S. Army Materiel Command. AMC is the Army's premier provider of materiel readiness -technology, acquisition support, materiel development, logistics power projection, and sustainment -to the total force, across the spectrum of joint military operations.
U.S. Army Aviation and Missile Research, Development, and Engineering Center provides increased responsiveness to the nation's Warfighters through aviation and missile capabilities and life cycle engineering solutions.
