Hartzell Engine Technologies Announces that CubCrafters has Selected the Lightweight X-Drive as the Standard Starter for the Carbon Cub SS

July 16, 2013
This is its first OEM (original equipment manufacturer) application for the new-generation X-Drive lightweight starter.

Montgomery, AL, (July 15, 2013) - Hartzell Engine Technologies LLC's President Mike Disbrow announced that CubCrafters has selected Hartzell's new X-Drive lightweight starter as standard on the company's upgraded, high-performance Carbon Cub SS light sport aircraft (LSA).

"This is our first OEM (original equipment manufacturer) application for the new-generation X-Drive lightweight starter," Disbrow said. "CubCrafters manufactures an exceptional line of certificated, LSA and kit aircraft. Their selection of the X-Dive starter for their upgraded Carbon Cub SS LSA is an outstanding endorsement."

Disbrow stressed that weight savings is especially important in LSA category aircraft like the Carbon Cub SS. "Every pound matters and the fact that the X-Drive is 1.7 pounds lighter than the previous starter is a significant contributor to helping CubCrafters meet the performance goals for the Carbon Cub SS," he said.

As testament to the value of saving weight, according to CubCrafters the 180-horsepower Carbon Cub SS has a power-to-weight ratio of just one horsepower to each 7.33 pounds of aircraft weight, (compared, for
example, to a Cessna 172R’s one to 15.33 ratio). 

According to CubCrafters, that ratio results in the Carbon Cub SS delivering a sea level 2 climb rate of 2,100 feet per minute. In addition, no other LSA takes off or lands in shorter distances or offers better low­-speed manners.

Randy Lervold, CubCrafters’ General Manager said that while the X-­Drive’s lighter-weight and strong starting performance were the primary reasons why the company selected it as the standard equipment starter, another advantage is the X­-Drive’s consistently low power
draw requirements.

“In the interest of overall weight reduction, we used the smallest possible battery for the  Carbon Cub SS LSA and the X-Drive’s low power draw enables it to provide consistent starts even with the lightweight 
battery,” he stated. “Since we introduced the X-Drive, we’ve received consistently good feedback from our owners on starting ease and reliability.”

Hartzell Engine Technologies’ V.P. Engineering, Rick Quave explained that while the X-Drive
is the company’s lightest starter, it offers many of the same engineering and performance
advancements found in other Hartzell starters.

“For example, the X­-Drive has the same high­-performance permanent magnet motor used in
our popular E­-Drive starter,” he said.“This motor provides an industry-leading duty cycle or
ratio of engagement to rest time, making it more damage tolerant. The X­-Drive also features
our new solenoid engagement technology. This is much less temperamental and more
reliable than the mechanical Bendix drives found on prior­-generation starters.”

Other advancements found in the Hartzell Engine Technologies X­-Drive starter include:
• Fully supported pinion gear encased in strong nose case
• High­-performance armature
• Redesigned brush holder and offset brush position for increased contact area
• Rare earth neodymium magnets
• Improved temperature stability

“With its overall lighter weight and exceptional performance, the X­-Drive has proven to be ideally suited for not only light sport and kit aircraft, but certificated
aircraft as well,” Disbrow said. “Just because a unit is designated as light-­-weight, doesn’t
mean it lacks in performance and reliability.”

About CubCrafters

CubCrafters is located in Yakima, Washington and was founded in 1980 by current owner
Jim Richmond. In 2007, CubCrafters was issued a FAA Production Certificate and is currently
the only aircraft manufacturer in the nation to produce both standard category and light sport
category aircraft under an FAA­-approved quality assurance program. CubCrafters’ roots are
in the 60­-year history of classic “taildragger” aviation, but its products and services are clearly
at the leading edge of technology. CubCrafters offers three all new, ready­-to­-fly aircraft:
The Sport Cub S2, the Carbon Cub SS and the Top Cub. The company also offers the
Carbon Cub EX kit aircraft. For more information, visit: www.cubcrafters.com.

About Hartzell Engine Technologies LLC.

Hartzell Engine Technologies LLC, along with its sister company, Hartzell Propeller Inc., form the
general aviation business unit of Tailwind Technologies Inc., a growing aerospace technology
company. Hartzell Engine Technologies is the leading OEM supplier of aircraft cabin heating 
solutions and engine accessories, including turbocharging systems, aircraft alternators, starters
and fuel pumps. For further information about Hartzell Engine Technologies and its products
please visit: www.HartzellEngineTech.com.