AvFAB Receives STC Approval For Beechcraft King Air Strecher/Divan Unit

Clinton, MO – May 20, 2010 – Aviation Fabricators (AvFab) is pleased to announce that they have STC approval for a Hawker Beechcraft 4-Place Convertible Divan/Stretcher. The STC is applicable to Beechcraft King Air 90 through 300 series aircraft.

This unit has the same appearance as a typical 4-Place Divan when installed in passenger configuration. It can quickly and easily be converted into a stretcher while in the aircraft. When in “stretcher configuration” the occupant may ride while lying down during all phases of the flight. The “lounge” type design allows the forward (head) end of the stretcher to raise and lower, which maximizes passenger comfort. The stretcher can be used as a bed for a VIP passenger or can be used as a place for a sick or injured person.

No airframe modification is required to install the divan other than removing existing seats and furnishings from the desired location, and setting the new 4-place divan into the vacated seat tracks. The divan can be installed on either side of the airplane in a range of stations. It will require the installation of AvFab shoulder harness kit.

AvFab also provides inspection, repair and overhaul of corporate aircraft interior parts and components, and is an FAA-PMA manufacturer of custom aircraft seating. AvFab’s sister company, Central Airmotive, is a comprehensive supplier of Original Equipment Manufacture interior products such as seats, divans, tables, toilets, cabinets and dividers. Central Airmotive currently has over 90,000 sq. ft. of OEM seats and cabin components. Together they represent a “one-source” solution for almost any corporate aircraft interior need. For more information on this or any other product or service offered by AvFab, call Jeff Lowe at 660-885-8317 or visit www.avfab.com.

Loading