Magnalight Releases Stainless Steel LED Class 1 Division 2 Light

The UL rated Class 1 light can operate on 120/277 VAC or 12/24 VDC.


Larson Electronics announced the addition of the latest Magnalight hazardous location LED light. The UL rated Class 1 Division 2 HALSS-48-2L-LED light can operate on 120/277 VAC or 12/24 VDC and is applicable for saltwater and other highly corrosive environments.

Larson Electronics announced the addition of a 48 watt Class 1 Division 2 stainless steel LED light for hazardous location areas. The HALSS-48-2L-LED is a 4 foot, 2 lamp LED hazardous location light made with a stainless steel housing and acrylic lens. An optional glass lens is also available. The hazardous location LED light ships with standard surface mount brackets, operates on 120/277 volts AC, and is connected via a ¾” NPT. Low voltage options for 12/24 VDC are available as well.

“This corrosion resistant Class 1 Division 2 LED light will operate 24/7 for more than 5 years in temperature conditions ranging from -40 degrees C to 85 degrees C.” said Rob Bresnahan with Larson Electronics’ magnalight.com. At the end of the 50,000 life hours, the operators can change the LED bulbs and run for another 5 years. Operators are making a very long life investment in this fixture. With fully integrated LED lights, once the LEDs have reached the end of their life, the entire fixture must be replaced. By using replaceable LED lamps, operators can continue to extend the life of this hazardous location LED light fixture indefinitely.”

Larson Electronics produces a wide range of explosion proof LED lights for hazardous location areas. Ranging from surface mount LED lights to portable handheld Class 1 Division 1 LED drop lights, magnalight.com is a one stop shop for commercial, industrial and military operators in hazardous locations and confined spaces.

We Recommend