Rapco Inc.

Rapco Inc.

rapcologo_10886158.png

Rapco Inc. is a manufacturer of aircraft pneumatic system components, brakes, and propeller de-ice products and an FAA-PMA aircraft parts manufacturing and overhaul facility. For technical assistance contact Mark Gaulke at mark.gaulke@rapcoinc.com. Hours of service: 8:00 a.m. to 5:00 p.m. (CST).

  • 445 Cardinal Lane
  • Hartland, WI 53029
  • United States
  • Phone: (262) 367-2292
  • Toll Free:
  • Fax: (262) 367-7158
  • Website: http://www.rapcoinc.com

Want to know more about Rapco Inc. Get Info Now

Expand for more details on this Company

RA2H3-2 vacuum regulator

Product From Rapco Inc.

The Rapco Inc. FAA-PMA approved RAregulator is a direct replacement for the Airborne Models 2H3-2, 133A3 and supersedes the AA2H3-2. The RA2H3-2 has a 5/8-inch hose fitting on the instrument side and a 5/8-inch threaded firewall fitting on the pump side. Older regulators that have seen more than 10 years service life are generally in need of replacement. Rapco Inc. regulators come preset to 5.0 HG in inches of Mercury (Hg) and are tested for consistant pressure output at various pressure inputs. The regulators are in stock and ready to ship. For more information visit www.rapcoinc.com.

Get Info Now

Rapco Fleet Support steel brake parts

Product From Rapco Inc.

Rapco Fleet Support Inc. is a manufacturer of FAA/PMA approved replacement steel brake parts for: Learjet, Hawker, Citation, Sabreliner, Beech King Air, B1900, B99, EMB-120, Jetstream J-31, and Metroliners. For more information visit www.rfsbrakes.com or call (262) 367-6210.

Get Info Now

Fleet Support Services fuel pump overhauls

Product From Rapco Inc.

Fleet Support Services offers overhaul of Airborne, Dukes, Weldon, and Lear Romec fuel pumps. It uses new FAA/PMA parts in its FAA-approved process specification overhaul and offers the same warranty as OEMs. For more information visit www.rfsbrakes.com or call (262) 912-6210.

Get Info Now

RA1H5-1 vacuum manifold dual check valve

Product From Rapco Inc.

Rapco Inc. has received FAA PMA approval on the RA1H5-1 vacuum manifold dual check valve. It is used on single and multi-engine aircraft with dual vacuum pumps in a pneumatic instrument system. It allows the system to remain operational in the event of a single vacuum pump failure. It is a direct replacement for Airborne 1H5-1. For more information visit www.rapcoinc.com or call (262) 367-2292.

Get Info Now

Rapco dry air pumps

Product From Rapco Inc.

Rapco dry air pumps now have an inspection port. The port is easily accessible on the top of the pump and features the Smart Stick, a go-no go gauge that helps determine pump life. Benefits include longer life and lower cost. Rapco offers technical support and a worldwide distribution network. For more information call (800) 527-2726 or visit www.rapco-rfs.com.

Get Info Now