Miller Electric Manufacturing Co.

Miller Electric Manufacturing Co.

No image available.

For more information visit www.MillerWelds.com or call 800-4-A-Miller.

  • 1635 W. Spencer Street, PO Box 1079
  • Appleton, WI 54912-1079
  • United States
  • Phone: 262-240-9790
  • Fax: 877-327-8132
  • Website: http://www.millerwelds.com

Want to know more about Miller Electric Manufacturing Co. Request more information

Expand for more details on this Company

Arc Armor safety glasses

Product From Miller Electric Manufacturing Co.

Miller Electric Mfg. Co. has added safety glasses to its Arc Armor line of welding protection products. Designed for optimal comfort, fit, and durability, the safety glasses are available in three different frame colors and either clear or shade 5.0 lenses. Featuring rubber ear pads and form-fitting orbital eye coverage, they reduce facial discomfort and pain that can occur after long periods of use. Protection features include shatter-proof polycarbonate lenses with an anti-scratch coating and soft foam eye guards that keep out dust and perspiration. The shade 5.0 glasses, ideal for plasma or oxy-fuel cutting, also feature a reflective outer coating that protects against ultraviolet light. They meet the requirements of the American National Standards Institute (ANSI) for personal eye and face protection devices. For more information visit www.MillerWelds.com or call (800) 426-4553.

Dynasty 350 AC/DC TIG Inverter

Product From Miller Electric Manufacturing Co.

Miller’s Dynasty350 AC/DC TIG inverter offers a strong welding output, advanced AC waveshaping controls and independent AC amplitude/amperage control for maximum productivity and quality on aluminum and other exotic alloys found in aviation manufacturing and repair. Advanced Pulsed TIG controls with expanded frequencies in both AC and DC settings constrict and focus the arc for greater arc stability, penetration and travel speeds, while increased puddle agitation improves the as-welded microstructure. The system is also smaller, more portable and more energy efficient than comparable transformer-based machines. For more information visit MillerWelds.com/products/TIG.

Welding gloves

Product From Miller Electric Manufacturing Co.

Miller has added a line of industrial gloves to its Arc Armor Welding Protection portfolio. These gloves are designed to endure the long-term, repetitive abuse prevalent within manufacturing, fabrication and construction welding applications. Miller’s industrial glove provides a level of comfort unmatched by traditional welding gloves and the necessary protection and dexterity welders’ jobs demand. Glove design is segmented into three categories: pattern, material usage, and lining. Each glove features a three-dimensional pattern designed to fit the natural contours of the human hand. Multiple types and grades of leather are strategically selected and placed to maximize the benefits of each material based upon the intended application the glove will support. Performance-based linings are also incorporated to provide heightened protection and enhance user comfort. Together the design, materials and lining allow the glove to produce a more favorable fit, enticing welders to keep the product on, decreasing the chance of hand injuries in the workplace. For more information visit www.MillerWelds.com or call (800) 426-4553.

Welding system

Product From Miller Electric Manufacturing Co.

 

 

Miller Electric Mfg. Co. offers Equip to Weld, an online tool designed to build a complete, customized industrial MIG/multiprocess/stick welding system from the ground up. Users are walked through a step-by-step process that helps them select their preferred power source, wire feeder, MIG gun, drive rolls, contact tips, regulator, gas hoses, primary cable and secondary cables (including terminations). The system updates the list price after each step and allows the user to e-mail the quote directly to the local Miller distributor for processing the completed order. The system is accessible at www.MillerWelds.com/equiptoweld. 

WeldX welding apparel

Product From Miller Electric Manufacturing Co.

Miller Electric offers WeldX, an apparel line for personal welding protection that is lightweight and breathable, yet provides exceptional flame and spatter resistance. Sixty percent lighter than most leathers and also lighter than many flame resistant cotton garments, it represents the next generation in protecting welders from the hazards of heavy-duty welding, while also reducing the potential for heat stress-related injuries. Flame resistance is inherent to WeldX – laundering will not degrade its performance over time. The fabric consists of a blend of oxidized acrylic fibers and modern strengthening fibers, which are then treated with a proprietary compound that allows the resulting material to “shed” spatter and sparks upon contact. The proprietary compound is embedded into the individual fibers rather than being applied topically, allowing the garment to retain a high degree of pliability and maneuverability. In even the most extreme environments, WeldX will not burn, melt, ignite, or shrink. The garments are available as standard welding jackets, sleeves, cape sleeves, bibs, and aprons, offering a range of protection options for a variety of applications and industries. For more information visit www.MillerWelds.com or call (800) 426-4553.. 

Axcess E with Insight welding monitoring system

Product From Miller Electric Manufacturing Co.

Miller Electric offers the Axcess E with Insight, an advanced MIG welding system that includes fully integrated data monitoring capability within the power source. The Insight weld process management system is embedded into the Axcess E

Spectrum 875 auto-line plasma cutter

Product From Miller Electric Manufacturing Co.

The Spectrum 975 Auto-Line from Miller accepts any primary input voltage from 208 to 575 volts, single- or three-phase, 50 or 60 Hz and is available in handheld and machine torch packages for mechanized plasma cutting applications. Weighing 56 pounds and able to cut metal up to 1 1/4-inch thick (7/8-in. at a rated quality of 10 inches per minute), the Spectrum 875 Auto-Line seamlessly recognizes and adjusts to any input voltage from 208 to 575 volts, single- or three-phase power and 50 or 60 Hz without the need for physical linking mechanisms. Auto-Line allows companies to simply plug the unit in and begin cutting in virtually any shop or field environment and location. The Spectrum 875 Auto-Line provides automatic air regulation, eliminating the need to manually adjust the air pressure to match the cutting application, an additional 5 amps of output power and Miller’s patented Ultra-Quick Connect torch and work cable for the fastest torch and cable connection and removal in the industry. For more information visit www.MillerWelds.com or call (800) 426-4553.

Pulsed MIG welding system

Product From Miller Electric Manufacturing Co.

Miller Electric Mfg. Co. offers its Invision MPa Plus System with Alumination technology. Using a benchtop feeder, the system provides both push-pull and standard push wire feeding capabilities and MIG/pulsed MIG welding outputs for heavy industrial applications that use aluminum and a second wire type or wire diameter at a single welding station. The system includes the Invision 352 MPa welder with built-in pulsed MIG programs, a D-74 MPa Plus dual wire feeder, the XR-Aluma-Pro Plus push-pull gun (15-, 25-, and 35-foot lengths), and a standard 400-amp Bernard Q-Gun. Alumination technology enables the push-pull gun to connect directly to the benchtop feeder, using tachometer feedback and improved software to provide consistent aluminum wire feeding and positive arc starts, even with 1/16-inch diameter aluminum wires. For more inforamtion visit www.MillerWelds.com or call (800) 426-4553.

Filtair 130 fume extractor

Product From Miller Electric Manufacturing Co.

Miller adds the FILTAIR 130 to its line of welding fume extraction devices. Whereas nearly 90 percent of welding fumes are between .1 and .4 microns, the FILTAIR 130 captures particles down to .1 micron, compared to competitive units that only capture particles .4 microns and larger. For reduced operator downtime and maintenance costs, it features a quick manually cleanable filter using compressed air for extended filter life. It is easily carried or rolled wherever welding is required. Plus, the unit's variable speed 1-hp motor filters up to 132 cfm at just 68.5 decibels. It comes with a standard 8-ft. collection hose; also available are optional 17- and 34-foot hoses, all of which connect to funnel or slotted nozzles or a fume extraction welding gun. For more information visit www.MillerWelds.com or call (800) 426-4553.

Invision MPa Plus System with Alumination technology

Product From Miller Electric Manufacturing Co.

Miller Electric Mfg. Co. offers its Invision MPa Plus System with Alumination technology. Using a benchtop feeder, the system provides both push-pull and standard push wire feeding capabilities and MIG/pulsed MIG welding outputs for heavy industrial applications that use aluminum and a second wire type or wire diameter at a single welding station. Compared to welding stations that use multiple wire feeders or systems, the Invision MPa Plus System reduces downtime associated with process changeover, simplifies operation, uses less space, uses less primary power, and improves welding performance when using aluminum, stainless steel and other wires. The system includes the Invision 352 MPa welder with built-in pulsed MIG programs, a D-74 MPa Plus dual wire feeder, the XR-Aluma-Pro Plus push-pull gun (15-, 25- and 35-foot lengths) and a standard 400-amp Bernard Q-Gun. Alumination technology enables the push-pull gun to connect directly to the benchtop feeder, using tachometer feedback and improved software to provide consistent aluminum wire feeding and positive arc starts, even with 1/16-inch diameter aluminum wires. An S-74 MPa Plus single wire feeder with Alumination technology is also available. For more information visit www.MillerWelds.com or call (800) 426-4553.