Kett Tool Co.

Kett Tool Co.

kettlogo_10272041.png

Kett Tool offers power tools with one-year limited warranties. For technical support contact the Sales Department or send email to info@kett-tool.com. Hours of service: 8:30 a.m. to 4:30 p.m. (EST).

  • 5055 Madison Road
  • Cincinnati, OH 45227
  • United States
  • Phone: 513-271-0333
  • Toll Free:
  • Fax: 513-271-5318
  • Website: http://www.kett-tool.com

Want to know more about Kett Tool Co. Get Info Now

Expand for more details on this Company

KD-446R profile shear

Product From Kett Tool Co.

This profile shear with right hand blades cuts profile and flat materials up to 18-gauge, spiral duct, wire mesh, and many other materials. These snips are extremely light and maneuverable at 5 pounds and can cut tight curves at a radius of 3 inches. The blades are made of high-quality steel, heat treated and precision ground. The KD-446R boasts a variable speed motor up to 2,500 rpm and cuts up to 28 fpm. U.S. Patent #7,971,360. For more information visit

Get Info Now

KD-446L profile shear

Product From Kett Tool Co.

This profile shear with left hand blades cuts profile and flat materials up to 18-gauge, spiral duct, wire mesh and many other materials. These snips are extremely light and maneuverable at 5 pounds and can cut tight curves at a radius of three inches. The blades are made of high-quality steel, heat treated and precision ground. The KD-446L boasts a variable speed motor up to 2,500 rpm and cuts up to 28 feet-per-minute. U.S. Patent # 7,971,360.

Get Info Now

KD-440 pistol-grip shear

Product From Kett Tool Co.

This lightweight, variable-speed pistol-grip shear cuts 14-gauge C.R. mild steel and most grades of stainless to 16-gauge. Double-insulated, the 5.0-amp KD-440 cuts at more than 150 inches-per-minute leaving a clean, flat sheet ready to fabricate. Distortions are absorbed in an easily disposed of waste curl, leaving the sheet cool and free of burn, chips and burrs. The cutting blades are finest high-speed steel, which users can easily replace.

Get Info Now

KD-442 variable-speed shear

Product From Kett Tool Co.

The KD-442 variable-speed shear easily cuts through 16-gauge C.R. mild steel and stainless to 18-gauge. The steel shear head has close-cutting, heavy duty blades that quickly cut through sheet metal, spiral pipe, metal doors and metal studs. Double-cutting action provides maximum sheet usage without burring or buckling the material. At less than 5 pounds, this KETT shear is both portable for location usage and durable for daily shop operations.

Get Info Now

KD-400 double-cut shears

Product From Kett Tool Co.

These variable-speed, double-cut shears feed quickly and quietly without warping or bending your finished piece (distortion is in the waste strip), while easily following a scribed line. The material’s edges are not hardened or burred for maximum use of each sheet. The swiping action of the blades seals the edge of coated metals. Cut C.R. mild steel up to 18-gauge in straight or contour lines at over 300 inches-per-minute, most grades of stainless and plastic or Formica up to 3/32 inch thick. Also available with a contour cutting blade to cut tighter curves and the HS blade for cutting foam-filled doors.

Get Info Now

KL-2030 electric nibbler

Product From Kett Tool Co.

This straight-handle electric nibbler cuts C.R. mild steel up to 18-gauge and most grades of stainless to 20-gauge. The long neck allows easy cutting of corrugated sheet and flat sheet at more than 80 inches-per-minute. Weighing just 4.5 pounds, this lightweight nibbler creates a clean, burr-free cut 1/4 inch wide.

Get Info Now

KL-1020 nibbler

Product From Kett Tool Co.

Straight-handle, 18-gauge nibbler with 4.0-amp, 2,500 rpm, double-insulated electric motor. The KL-1020 is lightweight at just 4 pounds and cuts 18-gauge C.R. mild steel and most grades of stainless to 16-gauge. Cuts flat and corrugated sheet up to 55 inches-per-minute with a minimum cutting radius of 5/8 inch.

Get Info Now

KL-242

Product From Kett Tool Co.

These lightweight, straight-handle shears are designed for durability. They can cut 16-gauge C.R. mild steel and stainless to 18-gauge. Close clearance, heavy-duty blades provide smooth cutting action without burring or buckling the material. The aluminum shear head curls the waste strip into a handy coil for fast clean-up, allowing maximum sheet usage. With a straight on/off switch, the KL-242 fills the gap between Kett light gauge and heavy gauge power shears.

Get Info Now

KL-241

Product From Kett Tool Co.

With a powerful 4.0-amp single-speed motor and speeds at 2,500 strokes-per-minute, the straight-handle KL-241 quickly cuts through plastics, wire mesh and rubber with a clean scissors action. When cutting thin coated metals, the swiping cut seals edges and is less likely to rust or corrode.

Get Info Now

KL-240 shears

Product From Kett Tool Co.

This lightweight, single-speed, straight-handle shear cuts 14-gauge C.R. mild steel and most grades of stainless up to 16-gauge. Double-insulated, the 4.0-amp KL-240 cuts are more than 150 inches-per-minute leaving a clean, flat sheet ready to fabricate. Distortions are absorbed in an easy disposed of waste curl, leaving the sheet cool and free of burn, chips and burrs. The cutting blades are finest high-speed steel, which users can easily replace.

Get Info Now