GE Sensing & Inspection Technologies

GE Sensing & Inspection Technologies

No image available.

GE Sensing & Inspection Technologies offers Air Data test sets. For technical support call (800) 833-9438 or email sensing@ge.com.

Want to know more about GE Sensing & Inspection Technologies Get Info Now

Expand for more details on this Company

Phased array corrosion inspection solution

Product From GE Sensing & Inspection Technologies

Part of GE Sensing & Inspection Technologies' field-proven phased array family, the Phasor CV/DM provides extensive inspection coverage with every scan, and even the smallest corrosion pit can be identified, measured and evaluated. Concurrently, inspection times are significantly reduced. The Phasor instrument platform offers the familiar features of its sister GE portable flaw detectors, such as thumbwheel controls and function buttons. It is sealed to IP65 for operation in the most hostile environments and weighs less than 10 lbs (4.4 kg) for ease of carrying. Its long-life battery can be re-charged on board and its large display screen allows superior image viewability in all conditions. For more information visit www.gesensinginspection.com.

Get Info Now

DXR250V portable digital radiography

Product From GE Sensing & Inspection Technologies

GE Sensing & Inspection Technologies now provides a comprehensive portfolio of imaging plates covering virtually all nondestructive testing (NDT) applications for computed radiography. The new IPU plates offer excellent sharpness and the best probability of detection in the GE portfolio, while maintaining the same high level of productivity. The DXR 250V uses a 200µm pixel pitch detector and has one of the largest active areas at 16 inch x 16 inch (41cm x 41cm). If image retention is required, users can take advantage of long-term storage and archiving of large numbers of digital radiographs. For more information visit www.gesensinginspection.com.

Get Info Now

USM GO ultrasonic flaw detector

Product From GE Sensing & Inspection Technologies

Weighing 2.2 pounds, the USM Go is the lightest and most portable ultrasonic flaw detector available from GE Sensing & Inspection Technologies. It is designed for ease of prolonged operation in the harshest inspection environments. It features pressure-responsive, joystick control, ergonomic design, and data display resolution on a screen with the largest pixel count of any instrument in its category. It is dust- and water-proof to IP67 certification standards and proven to withstand shock and vibration. With its unique flip facility, it can be operated with both the left-hand and the right-hand using the navigation joystick and the familiar function keys. The instrument’s 800x480 pixel display affords high resolution while the optimized aspect ratio ensures better echo separation. The display screen can be easily viewed in hand-held or mounted position and has been sized for optimal ergonomic use.

Get Info Now

NDT solutions

Product From GE Sensing & Inspection Technologies

GE Inspection Technologies designs, manufactures, and services an extensive array of inspection and nondestructive testing (NDT) solutions, spanning most of the leading NDT modalities including radiography, ultrasonic, eddy current, and remote visual inspection. Features include video capability; portable; large diameter pan-tilt-zoom camera; and quality images. For more information call (888) 332-3848 or visit www.ge.com/inspectiontechnologies. no image

Get Info Now

GE Sensing XL Go Videoprobe

Product From GE Sensing & Inspection Technologies

The XL Go Video Probe system from GE Sensing & Inspection Technologies meets MIL-STD-810F and MIL-STD-461E (above deck) standards and has a wide range of optical tip adaptors. It utilizes LED technology and features a VGA LCD for viewing still images and motion video. It combines cordless operation with no bulky base unit, no backpacks, and no tethered scopes. Shock absorbing materials and seals are incorporated to resist impact damage and to prevent dust and water intrusion. For more information call (888) 332-3848.

Get Info Now

GE Sensing & Inspection ISOVOLT Titan E x-ray machine

Product From GE Sensing & Inspection Technologies

The ISOVOLT Titan E stationary X-ray machine from GE Sensing & Inspection Technologies is based on the field-proven ISOVOLT Titan series and offers significant improvements in ease of operation, controllability and on-board logic to allow greater operational productivity and reliability. It offers the same high out put of 4.5 kw as the existing Titan family, with the same maximum tube current of 45 mA, extremely stable high voltage and very low ripple but this is now supported by a control platform that is more intuitive and easier to use. This is the result of an ergonomic, interactive re-design that features a fully graphic screen that clearly displays all operating and set-up parameters, a dynamic menu guide and a consistent method of operation that permits input through a keyboard, a speed-dependent wheel and function keys. It is complemented by a data-supported programming function for setting-up, archiving, and activating application-specific exposure programs and failsafe operation to meet international standards. The Titan E, which can display text messages in 16 languages, has been designed for stand-alone operation and for integration in complex inspection systems. For more information visit www.geinspectiontechnologies.com.

Get Info Now

CR 50P portable computed radiography scanner

Product From GE Sensing & Inspection Technologies

The CR 50P portable computed radiography scanner from GE Inspection Technologies is light and compact enough to allow the benefits of computed radiography to be realized at remote locations in applications requiring both high throughput and high resolution. With a laser spot size of just 50 micron and with the high resolution of today™s IPS display screens, the scanner will allow computed radiography to assume more and more of the duties which have conventionally been restricted to film radiography. Weighing just 22 kilograms, it offers excellent image quality through its optimized optics and a scan resolution which can be user-variable from 50 to 130 µm pixel pitch. Scan results can be displayed on a connected laptop or a local high resolution monitor. The output data can also be processed using Rhythm software, which has been specifically designed for NDT applications and offers advanced image review tools and data management and storage. For more information visit www.ge.com/inspectiontechnologies.

Get Info Now

Phased array ultrasonic immersion transducers

Product From GE Sensing & Inspection Technologies

A range of phased array ultrasonic immersion transducers, optimally matched for use with the company™s phased array flaw detection equipment, is now available from GE Inspection Technologies. The transducers can be supplied in flat and curved configurations and will find application throughout the power-generation, oil and gas, aerospace, automotive and general engineering sectors. The probes offer frequencies from 1 MHz to 10 MHz and can have 32, 64, or 128 elements. They complement GE™s existing range of linear angle beam phased array probes, which are available with frequencies up to 7.5 MHz, with 16, 32, 64, or 128 elements. All probes can be used with GE phased array instruments and systems, including the Phasor XS and the WeldStar girth weld inspection system, as well as the company™s range of UTxx in-plant ultrasonic inspection machines. For more information visit www.ge.com/inspectiontechnologies.

Get Info Now

8.4 mm Probe

Product From GE Sensing & Inspection Technologies

GE Inspection Technologies offers end-users increased flexibility to fulfill their inspection needs. The Everest XLG3 VideoProbe line offers a full range of probes in three diameters: 3.9-, 6.1-, and 8.4 millimeters. The interchangeable probes offer a flexible inspection solution in one VideoProbe system. The multiple XLG3 probes allow fast changes during inspection and more equipment utilization. Key applications for the XLG3's include large turbine inspections, large tank and vessel inspections, airframe inspections and large pipe and header inspections. GE's Everest XLG3 system is a video borescope that offers enhanced inspection productivity. To learn more about GE Inspection Technologies, visit www.ge.com/inspectiontechnologies.

Get Info Now

GE inspection service

Product From GE Sensing & Inspection Technologies

GE Inspection Technologies provides technology-driven inspection solutions and produces radiographic, ultrasonic, remote visual and eddy current equipment. It offer nondestructive testing and phased array testing. For more information, visit www.ge.com/inspectiontechnologies or call its customer care center at (888) 332-3848.

Get Info Now