Eaton

Eaton

eatoncorporationcartergroundfueling_10018024.png

Eaton's Irvine, CA facility manufactures and supports Carter brand ground refueling products, including nozzles, hydrant valves and coupler, inline and bypass pressure control valves, digital pressure control systems, breakaway couplings, unisex couplings, electronic water detectors, bottom loading system components and adapters.

  • 9650 Jeronimo Road
  • Irvine, CA 92618
  • United States
  • Phone: 949-452-9500
  • Toll Free:
  • Fax: 949-452-9992
  • Website: http://www.eaton.com

Want to know more about Eaton Get Info Now

Expand for more details on this Company

Nozzle Ball Valve

Product From Eaton

Eaton’s Carter product line has developed a nozzle ball valve that is currently being used by the warfighter. The Carter Nozzle Ball Valve bolts to the inlet of any Carter Nozzle (and most nozzles from other manufacturers) and allows for quick and easy strainer inspection without removing the nozzle. This eliminates the need to open the system and prevents fuel spills. For more information visit 

Get Info Now

Fueling Coupler

Product From Eaton

Eaton's Model 64910/64810 coupler's lower half have been completely redesigned. Incorporating three detent pins, an internal collar locking device and new collar lifting handle, this new design provides improved ergonomics and operational handling during disconnect.

Get Info Now

Eaton Sure-Mate Quick Disconnect Couplings

Product From Eaton

Eaton's Aeroquip product line of Sure-Mate self-sealing, thread-together, quick disconnect couplings allow for quick, easy, reliable connection and disconnection of lube oil, coolant, and hydraulic lines for civil and military aircraft as well as ground vehicle applications. The design incorporates timed threads, locking fingers, tubular valve and sleeve technology, a flush face design, bonded elastomeric seals, blunt start Acme threads, and a one-piece male half. Sure-Mate couplings meet or exceed SAE AS1709 specifications, are available in titanium and aluminum, can accommodate operating pressures up to 5000 psi (345 bar), and can operate at temperatures ranging from -65 F to 275 F (-54 C to 135 C). For more information visit

Get Info Now

Eaton fuel systems

Product From Eaton

Eaton's fuel pump and canister retrofit for the B747-400 requires no additional hardware or aircraft changes, which minimizes aircraft downtime requirements and schedule disruption for the retrofit. For more information, visit www.aerospace.eaton.com or call (601) 877-3323.

Get Info Now

Eaton hydrodynamic seal

Product From Eaton

Eaton offers high-performance noncontacting hydrodynamic seals in face (axial) and radial (circumferential) forms. Both can improve sealing capabilities for speed and pressure significantly, and reduce overhaul frequency. For more information visit www.aerospace.eaton.com or call (601) 877-3323.

Get Info Now

Eaton's Arc-Fault Technology

Product From Eaton

Eaton's arc-fault technology for an aircraft's electrical system provides an overall increased level of protection and safety. It immediately detects and addresses any arcing events that could occur in the interior wiring, minimizing any chance of an electrical problem or fire. For more information visit

Get Info Now

Eaton's Hydraulic Pump Upgrade Model PV3-240-10C

Product From Eaton

Extensive analysis and testing has resulted in the development of a substantial product improvement to Eaton's Vickers product line hydraulic pump (PV3-240-10C). This modification will significantly reduce external leakage associated with the face seal at the parting line interface between the adapter block and housing. For more information visit

Get Info Now

Eaton U-Plex Seals

Product From Eaton

Eaton's U-Plex pneumatic seals are an interchangeable alternative to a traditional E-seal that, under testing, showed that it can seal when assembled flanges are distorted as much as 2.5 to five times more than a conventional E-seal can. The U-Plex is a metallic seal that allows for greater deflection capacity with lower bending stresses, providing extended seal performance among other benefits. The area of the pneumatic system that the U-Plex most shows benefit is the metallic joint system; it is capable of sealing beyond its axial free height due to its two-ply design that allows for increased elasticity and structure. For more information visit

Get Info Now

Eaton Phenom 100 flap actuators

Product From Eaton

Eaton Corporation™s offers an electronically synchronized flap actuator system designed and developed specifically for the new Embraer Phenom 100. Traditional mechanical flap systems feature flexible metal shafts connected between each of the flap or slat actuators mounted in the aircraft wing, all driven by a central power drive unit. The Embraer Phenom 100 system utilizes a brushless DC motor integrated directly within each actuator assembly. System synchronization is accomplished electronically, replacing the flex shafts with electrical wiring. Eaton developed this technology to advance the "state of the art" in flap systems specifically for VLJs to reduce system weight, increase reliability and improve overall performance. For more information visit www.eaton.com.

Get Info Now

Sealed Circuit Breaker

Product From Eaton

Eaton's sealed circuit breaker provides a integrated seal into the circuit breaker assembly providing increased reliability in harsh environments. It has enhanced moisture and sand/dust sealing. It eliminates the need for separate boot seal and is ideal for harsh environments where sand/dust or moisture are an issue. Form/fit function replacement to exisiting cicruit breaker. For more information visit

Get Info Now