Liquip International Pty. Ltd.

Liquip International Pty. Ltd.

liquipinternationalptyltd_10017540.png

Liquip is a world leader with innovative refueling equipment from stationary carts to fuel trucks.

  • 602-606 Somerville Road
  • Sunshine West, Melbourne 3020
  • Victoria,
  • Australia
  • Phone: +613-8311-6600
  • Toll Free:
  • Fax: +613-9310-1639
  • Website:

Want to know more about Liquip International Pty. Ltd. Get Info Now

Expand for more details on this Company

Global Leader

Product From Liquip International Pty. Ltd.

Liquip International is the global leader in aviation fueling equipment, including hydrant dispenser trucks, narrow-body and wide-body hydrant carts and refuelers from 1,000 gallons to 10,000 gallons.

Get Info Now

WBC800 High Flow Wide Body Hydrant Cart

Product From Liquip International Pty. Ltd.

Liquip International Pty. Ltd. manufactures the WBC800 High Flow Wide Body Hydrant Cart. The self-propelled unit is equipped with a diesel engine, hydraulic drive system, and collapsible lift platform while reaching flows into-plane at 800 GPM.

Get Info Now

ASTs

Product From Liquip International Pty. Ltd.

convault inc. offers the UL2085-listed above ground storage tanks for petroleum and chemical products. ConVault AST’s have built-in secondary containment and warranty is generally 20 or 30 years; fire/vehicle impact resistant and bullet-proof.

Get Info Now

WBC800 Hydrant Cart

Product From Liquip International Pty. Ltd.

Liquip International introduces their new WBC800 High Flow Wide Body Hydrant Cart. This self-propelled unit is equipped with a diesel engine, hydraulic drive system and collapsible lift platform while reaching flows into-plane at 800 GPM.

Get Info Now

High Lift Hydrant Carts

Product From Liquip International Pty. Ltd.

Liquip International Pty Ltd. manufacture high lift hydrant carts to service wide body aircraft. The carts are high flow performance with a balanced venturi system that ensures the maximum flow through the aircraft-fuelling adaptor. The total parked height of the cart is 54 inches; with the platform extended, the floor working height above ground is over 150 inches. The unique Liquip boom permits the platform to be lowered to the ground with the hoses still connected to the aircraft without fuel interruption.

Get Info Now

Hose Beads

Product From Liquip International Pty. Ltd.

Replacing aviation hose can be a costly exercise. Hose Beads
save the hose from rubbing along the tarmac, thus avoiding
wear and tear. The yellow bead acts as a hose marker in night
conditions and also allows for relatively effortless maneuvering of the hose. Liquip suggests that a bead is fitted for every 500 mm run of hose.

Get Info Now

LSV 475 Narrow Body Cart

Product From Liquip International Pty. Ltd.

Liquip International introduces the new LSV 475 narrow body cart operating at American Airlines in Chicago O'Hare airport since May. The cart has a high flow rate for 475 USG/M. The sense circuit is operated by fuel over fuel, ensuring the cart will operate at sub zero temperatures without any problems normally associated with narrow body carts. The electronic register (also manufactured by Liquip) and printer are powered by an on board generator driven by the fuel flow without any effect in the rate of flow. This is a completely sealed and environmentally safe system; smart use of electric power ensures that the cart will continue to operate under all adverse conditions.

Get Info Now

Mechanical Engine Strangler

Product From Liquip International Pty. Ltd.

The Liquip mechanical engine strangler, on its own, is an emergency engine shutdown device, pneumatically or manually actuated to stop the engine in case of diesel runaway during a fuel spill. It can also be actuated by a Liquip roll over sensor via a solenoid valve. This provides a complete system of engine protection and electrical isolation for maximum vehicle safety. The unit is 100 percent reusable. Once installed it never needs replacement, no matter how many times it saves the vehicle. This product is standard fitment to many international oil companies trucks. Available in two sizes: MES3 (75mm dia.) and MES5 (l25mm dia.).

Get Info Now