Since acquiring the JETPorter line in 2006, Tronair realized that operators weren’t thrilled about getting down on hands and knees, crawling under the aircraft, putting a strap around the landing gear and then pulling the plane into the cradle.
Martin Kurzdorfer, Tronair’s vice president of sales and marketing recounted a number of such stories heard during visits to many JETPorter and TLTV tug operators.
“Man, this a real pain in the butt,” was a common theme heard repeatedly.
In addition, Tronair had received many reports of “negative events,” which means that the use of a strap capture method had damaged the aircraft landing gear.
As a result, Tronair’s engineering department decided to take a hard look at the problem.
What the engineers devised worked out perfectly for US Airways Express last year when new gates opened up at Reagan National Airport for the airline’s regional flights.
"For the first time a GSE manufacturer has brought an interesting product down to our Express world," says Fred Maslow, analyst for station resource allocation, Piedmont Airlines, Inc. "It is our pushback operator’s tug of choice."
Before the new gates opened up, the jets parked remotely and the planes relied on their own power to make the turns. With the new gates, the ground crew would be handling pushbacks and also towing planes to hangars with tight space requirements.
With those challenges in mind, Tronair's engineering department worked closely with US Airways Express to devise a new way to perform these everyday operations.
As a result, US Airways Express became Tronair’s launch customer for the Softcapture® outfitted on the JETPorter JP100S. The innovative cradle allows one operator to capture and move aircraft without straps, without touching the oleo strut – or any part of the nose landing gear – and all without leaving the driver’s seat.
That's a great way to summarize why we picked the Softcapture and Tronair as the year's Ground Support Product Leader.
The Cradle: Let’s describe the operational procedure how the SoftCapture works on the model JP100S:
- The operator drives the tractor to within 2-3 feet of the aircraft’s nose landing gear. The driver then lowers the cradle by holding the “cradle down” switch, until the cradle motion stops.
- The cradle stops its downward motion when a bottom roller causes a proximity switch to trip. The act of lowering the cradle automatically puts the vehicle to safely approach the aircraft.
- The operator then opens the cradle by holding both the “cradle down” and the “cradle open” switch at the same time. Both switches are held until the cradle motion stops. Motion is stopped when the side cradle cylinders reach the end of their stroke.
- The operator proceeds to move the vehicle forward and aligns the upper rollers with the ribs of the nose landing gear’s tire tread. When the tires make contact with the rear cradle bar, the forward throttle shuts off.
- The operator then presses and holds the “cradle close” switch until the cradle motion stops. When the cradle gates swing past the 45-degree position, the parking brake on the vehicle is released. This allows the vehicle to roll in relation to the aircraft and avoids placing horizontal load on the landing gear.
- Meanwhile, the cradle gates continue to close until hydraulic fluid flows over a preset relief valve, which stops the cradle motion.
- The operator then presses the “cradle up” switch until the cradle motion stops. The cradle tilts to a 15-degree angle. Between 13 degrees and 15 degrees, the cradle make contact with the proximity switch. Also, the upper hold-down arms lock in place between 13 degrees and 15 degrees. The fully raised cradle takes the vehicle out of “creep speed.”
Once the aircraft is taken to where it needs to be, the driver presses the “cradle down” button until the cradle movement stops. The start of the downward movement, releases the upper hold-down arms. With the cradle down, the vehicle is again restricted to creep speed. The driver backs straight away with turning the steering wheel until the landing gear is clear.
JETporter, a Tronair company, announces it has received formal approval from Cessna Aircraft Company for the use of JETporter towbarless tugs with Cessna aircraft.
Winners will be announced at upcoming AviationPros LIVE in March.