Air Carriers Developing the MRO Interface

Special requirements by the operator can affect MRO performance.


Special requirements by the operator created by provisions in their vendor instructions may hobble heavy check performance. The rule states that the MRO must comply with applicable portions of the operator’s maintenance manual. Application of the operator’s internal standards to the repair station activities are not assessed on their effect on the project. Often, when this is pointed out by the MRO, the rejoinder is that they must follow their manual requirements as they direct. This is true. They must. However, everyone’s concept of what constitutes the “applicable portion” is different. The devil is in the differences.

Industry standardization would help

Having watched all of this from both sides it would seem to me that the best low hanging fruit for improvements in this area is an effort to standardize those processes that are mutually shared in getting an aircraft back in the air. Manage the interface. For example, both operators and MROs use nonroutine forms. Industry level standardization of nonroutine records could be devised in a format that could be used across both computerized and “hand managed” platforms. A standardized nonroutine format with generally accepted methods of execution would relieve everyone of the need to address incompatibility of formats when trying to manage discrepancy and repair data.

Now this may seem trivial to many, but, beyond routine task cards provided by the operator, nonroutine task cards are the most used form of the project. It is the vehicle that records all of the maintenance accomplished for check findings. Between the MRO and operator its format and presentation is currently what the imagination can make it in flavors both hardcopy and electronic. It’s the key product that records the maintenance performed and provides the information to create the bill. Just from an economic point of view alone, it’s worth considering. Standardization here may have benefits largely by creating repeatability in aircraft quality and reliability simply by giving everyone an accurate idea of what is going on.

A good example of a successful standardization effort was the development of the 8130-3 Authorized Release form. It’s capable of being completed electronically, or by hand; stored electronically or in physical files; with a standardized method of completion for a variety of conditions. And everybody these days uses it. It’s almost currency.

Will SMS have an impact?

Safety management systems (SMS) will eventually get around to making us all reexamine our outsourcing policies and processes. In doing so, operators will have to understand more than Part 145 compliance aspects. In choosing an MRO, each operator should make the effort to evaluate the interface between it and its new partner. The decision to use or pass on outsourced maintenance will have to be based on the compatibility of the MRO’s production system with its own production and compliance goals as an aspect of SMS evaluation.

For example, if an MRO has invested heavily in lean processes to produce internal efficiencies, the operator’s quality organization can impose un-optimized processes undermining the MRO’s lean implementation. This can affect both parties’ quality and production expectations. The operator must be prepared to address these issues in comparison to its own internal requirements. Their assessment can allow adjustments to meet its program requirements but align it to take advantage of the MRO’s improvement efforts.

Another tool that can define and refine the relationship between operators and MRO is the airworthiness agreement. While business contracts define the invoice, the airworthiness agreement defines the compliance state of the aircraft in the context of a conversation between the MRO and air carrier maintenance organizations. Defining the processes and certification standards that take into account the repair stations needs creates more predictability in the project outcome and improves communication.

In assessing the MRO, the air carrier in the 21st century can no longer rely on repair station compliance audits as a means to judge the probable outcome of an aircraft heavy check project. Some assistance from the regulator in creating work record standardization would allow the industry to design an interface that would bring commonality to production management. In moving to the SMS environment carriers now need to assess their own processes effects on vendors when engaged in outsourcing. By defining the interface between themselves and the MRO they will be able to address and standardize processes and controls. In doing so, they create a relationship with their repair station partners that can promote a high level of quality and repeatability in aircraft deliveries.

We Recommend