Turbochargers are being installed on many hungry diesels from belt loaders to air starts. One reason is that the EPA believes it cuts down on pollutants from these typically smoky engines.
Turbochargers definitely produce more power. To create that extra power, turbochargers ram more air into the cylinder. This makes the turbocharged engine not only more powerful relative to its size, but also makes it run more efficiently than a regular combustion engine.
A turbocharged engine in a truck, for example, can generate as much as 40 percent more power and cut down fuel costs and emissions by up to 15 percent compared to a non-turbocharged engine.
The main reason for the turbocharger in GSE is the lag in delivering oxygen during the initial throttle. Squirt some fuel, and there better be a good charge of air to combust the fuel. And we’re not interested in speed, of course, as much as we are in torque.
New orders always come with secondary costs and new ways to think. Turbocharged engines, for example, not maintained by regular oil changes fail. It’s that simple.
Simple things not done can cost a mind-boggling amount of dollars. Over-heating and loss of power come to mind, naturally. But if the turbocharged engine powering an air start shuts down during the process, there could be major damage to aircraft. You definitely do not want something like an air start to cough the moment you need it.
In the matter of oil changes, I can really blame the fact that turbocharged diesel engines need high quality oil. The bearings of turbos are red hot in moments after the engines run for a few seconds. Problems come from the oil that circulates around this bearing. Shut it off and the oil cooks to carbon, slowly but surely blocking the oil flow.
If you have an engine at full-out screaming rpms, and then abruptly shut it off as many average Joes do, it will fail. Maybe not today. Maybe not tomorrow. But definitely when you need it most. That’s an “always.”
But wait there’s more!
Follow the exhaust, and you’ll see it goes to a catalytic converter. What you’ll see in this cat is a honeycomb of fine metal. The exhaust is hot enough to make these babies glow.
Inside this unit is a very costly mixture of fancy chemicals that try to burn all the unspent fuel. Well, if the turbo bearings fail and spew oil into the system, it passes the pistons to pile on the honeycomb.
No biggy at first … until it piles so thick you start to lose power. The morning starts are harder. Sometimes people just assume the engine is tired. Change out the engine, right? Oh yeah. Twelve thousand dollars later, the same problem!
There are a few things you can do to prevent this:
- Change your oil. Often. An oil change is nothing compared to expensive repairs and down time.
- Know your engine. Many times I wonder why it just isn’t bolted on instead of welded for inspection. Pressure sensors could give awareness of upcoming problems. I sometimes whip out my infrared temperature laser and look at exhaust temps.
But the best advice I can give you is to change the oil if you love the engine (which goes without saying). I’ve never seen a warranty say changing the oil “often” will void it.
Finally, here’s something wonderful and not well-thought-out: The location of the air filter often affects the whole system. The filter should not be exposed to the crazy blow by of a big diesel. But it is and, naturally, this plugs the filter and cuts down air flow. If you’ve continued to change the oil and are still having trouble, this might be a place to start.
This is just some of the typical things I come across day after day. It’s almost second nature to know right off what’s wrong with these air-huffing engines. I wonder if the engineers who designed them ever changed the oil in one.
Change the oil, please. Often.
Boosting Your Knowledge of Turbocharging (Part 1 of a 2 part Series) By Randy Knuteson July 1999 A short 15 years after Orville and Wilbur made their historic flight at Kitty...
Boosting Your Knowlege of Turbocharging Part II -Valves and Controllers By Randy Knuteson October 1999 All normally aspirated aircraft engines gain altitude at the expense of...
Piston Engine Troubleshooting By Thomas Ehresman March 1998 You work in a shop that specializes in turbine equipment. The few cabin class piston twins for which the FBO is responsible...