Provide comfort and promote efficiency with a workstation designed with T-slotted aluminum extrusions from 80/20 Inc. T-slotted extrusions provide the adjustability to make one work area ergonomically correct for several operators, and can be easily redesigned as processes and procedures change. Standard components like tool hangers, storage bins, swing arms, and linear bearings allow for quick and efficient setup changes. Many extrusions can also be used as a pressure manifold up to 150 psi to accommodate valves, actuators, pumps, regulators, and hoses, eliminating the burden of unnecessary pneumatic lines. The extrusions are cost-effective, modular, require less assembly time, and require the use of only simple hand tools. For more information visit www.8020.net or call (260) 248-8030.
Typical uses for the explosionproof manlift from Man & Material Lift Engineering include aircraft and equipment painting and fuel storage. The units include a water-cooled exhaust manifold to keep the exhaust stream below 350 F along with approved engine sensing and fuel shut-off controls. Currently available in the following telescopic boom models: T80DY - 80-foot platform height, T60JDY - 60-foot platform height, and T46JDY - 46-foot platform height. Features include 35-foot platform height; 650-pound platform capacity; 60-inch by 36-inch platform; gas, propane, diesel, or electric power; and tread foam filled tires. For more information visit www.manliftengineering.com, www.exmanlifts.com, or call (414) 486-1760.
Ready Products offers the Retract-A-Bit self-storing screwdriver system that features bits which can be changed with the push of a button. Because the bits are integral to the screwdriver, they can never be lost — making them ideal for many around the hangar uses. Simply select the desired bit, and slide its button into place — a locking collar ensures its stability during use. To change bits, depress the collar, and retract the bit into the handle. It includes two Phillips head, two Slotted head, one Square, and a T15 Torx head bit. For more information visit www.ready-tools.com or call (866) 942-9230.
T1 Abrasive Wheels
A full line of cotton-reinforced T1 abrasive wheels is available from Rex-Cut Products Inc. They provide smooth, chatter-free operation and are constantly revealing fresh abrasives. Designed for use in high-speed die grinders, they can grind, debur, and finish in one-step without changing a part’s geometry. They are offered with either a hard or soft bond in coarse, medium, fine, and very fine grits. Sizes available are 2-, 2 1/2-, and 3-inch diameter by 1/16-, 1/8-, and 1/4-inch thick and a 1/4- or 3/8-inch bore. For more information visit www. rexcut.com or call (800) 225-8182.
Digital Aircraft Cable Tension Meter
Tensitron’s ACX series of precision, digital aircraft cable tension meters provide accuracy and resolution for numerous cable sizes and tension ranges. Simply select the cable size and the instrument automatically adjusts to the correct setting, providing a direct reading of tension in either pounds, newtons, or kilograms. Some of the standard features include: rechargeable batteries, memory feature, large easy-to-read backlit display, one-hand operation, and CE certification. All models factory calibrated and ready for use on aircraft. For more information visit www.tensitron.com or call (303) 702-1980.
Brown Aviation Tool offers its BAT-70 drill block. This tool allows you to drill perfectly straight holes on a variety of flat and curved surfaces. It features precision and hardened drill bushings for long life. Standard with the most popular aviation drill sizes of #40, #30, #21, and #10, the BAT-70 can also be customized with any size bushing desired. Completely manufactured in the USA. For more information visit www.browntool.com.