Miller Electric’s Syncrowave 200 AC/DC TIG/stick welder features an extended power range for welding thicker materials (up to 1/4-inch aluminum in AC TIG. It helps operators enhance weld appearance with an easy-to-use, built-in pulse control that also helps eliminate burn-through and distortion. The Syncrowave 200 tailors its arc starts with Syncro Start, a selectable arc start condition feature. Other features include Fan-On-Demand, Auto-Postflow, Adaptive Hot Start for stick arc starts, and a 115-volt auxiliary power receptacle located on the front of the machine. The Syncrowave 200 provides 5- to 200-amp output power (150 amps at 40 percent duty cycle). For more information visit millerweldsor call (800) 426-4553.
Barfield expands its line with a cable tensiometer designed for testing and measuring tension of aircraft cables. The hand-held tool provides accurate readings for both American (pound) and international (Newtons) cabling measurements. It offers a precise method for measuring the existing tension in cables from 1/16 to 1/4 inch as well as from CWT5 to CWT45 (European standard). An entire testing operation can be done with one hand without using conversion tables. It is operated by a self-contained rechargeable lithium-ion battery with 16-hour minimum operational life as well as a 10-minute automatic shutoff feature. For more information visit barfieldinc.
Heat Gun/Soldering Iron Kit
The Malcom MCH-100 portable, battery-powered heat gun and soldering iron kit features a 48-volt rechargeable battery pack housed in a rugged carrying case equipped with a 9-foot cable for connecting each tool. Providing a complete package for electronic field repairs, the hot air gun reaches 1,350 F for installing heat-shrinkable tubing, boots, and solder sleeves, while the soldering iron can perform a variety of different repairs. The heat gun features interchangeable heating elements from 200 to 400 watts, a built-in motor with a fan to provide 2.66 cfm airflow, and comes with four different nozzles for most applications. For more information visit malcom or call (888) 807-4030.
Mobile Storage Cabinet/Workstations
Two mobile storage cabinet/workstations have been added to Durham’s line. Both are designed to combine compact, secure storage with a work surface and mobility. One model offers eight lockable drawers and the other offers four lockable drawers and a single shelf compartment with a lockable door. Locks are all keyed alike. Both feature heavy-duty, all-welded, 16-gauge steel construction and measure 46 inches wide by 21 inches deep by 34 inches high with a 3-inch lip on the back of the top surface for work retention. It has 5-inch by 1 1/4-inch polyurethane bolt-on casters, two swivel, two rigid, and push handles to provide easy, effortless movement. For more information visit durhammfg or call (800) 243-3774.
Fuel Nozzle Tester
Pratt & Whitney Tool Support Services offers the updated PWC90086 PT6 Simplex fuel nozzle spray chamber. It is stored in a self-contained, heavy-duty portable case. Standard shop air service is all that is required for nozzle spray cone inspection. Fuel nozzles are loaded and positioned quickly into a specially designed fixture. The spray cone is illuminated from below for better visual inspection. Operating instructions are built directly into the unit for easy, first-time operation. For more information contact John Lemire at (860) 610-2664.
RVSM Air Data Test Set