LUBRICANTS AND CLEANERS
AeroShell offers a full range
of aviation lubricants and aircraft
cleaners and polishes. All
products are fully tested and
approved by U.S. military and
key OEMs. AeroShell has a distribution
network that makes the
products easily available.
For more information visit www.aeroshell.com.
POLISH AND PROTECTANT
Clear View Plastic Polish and Protectant is
part of the Clear View brand of cleaners,
which includes Clear View Plastic and Glass
Cleaner. Clear View is formulated specifically
for the aviation industry. It polishes and
protects all clear and colored plastics, makes
fine scratches less visible, and sprays on and
wipes off easily, with no film or haze finish. It
is an anti-static and anti-dust formulation.
For more information visit www.avlab.com or call (713) 864-6677.
ICE PROTECTION SYSTEM
Aviation Laboratories TKS Fluid is an
in-flight anti-icing agent which prevents
ice buildup by forming a protective
liquid film on ice-free aircraft surfaces.
TKS fluid meets stringent DTD406B
specifications, and it has been tested and
approved by British Aerospace. it is available
in 1-, 2.5-, and 55-gallon packaging.
For more information visit www.avlab.com.
FUEL ADDITIVE
DICE is supplied exclusively by
Aviation Laboratories. It controls
fuel system icing in aviation turbine
fuels. There is strict quality
control to ensure purity and strict
product stewardship to ensure
product and packaging integrity.
More than 40 stocking locations
across the United States ensure
fast delivery times; It is manufactured
in the United States by the
Dow Chemical Company.
For more information visit www.avlab.com or call
(713) 864-6677.
LUBRICANTS
Aviall distributes a wide range of lubricants and
chemicals from the industry's leading manufacturers
including AeroShell, Air BP, Anderol, ExxonMobil,
Henkel, Loctite, LPS Laboratories, Pantheon Chemical,
and Solutia.
For more information visit www.aviall.com or call (800) AVIALL-1.
ANTI-CORROSION TREATMENT
Lear Chemical's ACF-50 (anti-corrosion
formula) works both to
prevent and stop corrosion in
key aircraft systems. It is OEM
recommended and approved
and U.S. Navy qualified. It has
been proven effective on structures
and avionics. It improves
on-time readiness, is nontoxic
and nonflammable, cost-effective, and has a high degree
of coverage. Reapplication can occur at C check interval
or biannually.
For more information visit www.learchem.com
MULTIGRADE AVIATION OIL
Phillips 66 Aviation offers a line of
aviation oils for piston engine aircraft,
including multi-viscosity oils for all climate
protection to single grades, breakin
oils, and preservation oils. Phillips
66 Aviation offers the only multigrade
aviation oil you can use from break-in
to TBO (time before overhaul). All of
the aviation oils offered are 100 percent
mineral-based multigrade oils. They
maintain film strength under high load
conditions and are designed for use in
all seasons.
For more information visit www.phillips66aviation.com or call (800) 766-0050.
BIOCIDE
Fuel Quality Services' IATA
approved Kathon FP 1.5 has been
thoroughly tested and approved by
major engine and airframe manufacturers.
It is a fast-acting, "quick kill
time," broad spectrum biocide. The
HY-LiTE Biological Fuel Test provides
results in 15 minutes. No prior
lab training required.
For more information visit www.fqsinc.com or call
(770) 967-9790.
20W-50 OIL
After more than 3 million flight hours in
thousands of piston-engine aircraft, it's
clear than Exxon Aviation Oil Elite 20W-
50 can reduce engine wear by controlling
rust and corrosion. It is an advanced
blend of synthetic and mineral-based
oils in a proprietary additive package
to control wear. It controls rust and corrosion
and offers 2x the rust protection
of a competitive 15W-50 oil. Engineered
to reduce wear and cobat rust and corrosion
in aircraft piston engines and it
is suitable for recreational aircraft that
typically sit on the ground for days between uses and are
thus susceptible to buildup of rust and corrosion.
For more information, visit www.ExxonElite.com.
