STRUT FILL TOOL
The design of the Falcon strut fill tool
from Alberth Aviation enhances the
ergonomics and safety that have long
been a concern of other designs. It
provides better access to strut valve,
and features fill hose, stainless construction,
adjustable wrench angle,
and eyelet for torque tightening.
There is storage in handle for fittings
and seals.
For more information visit www.alberthaviation.com or
call (832) 934-0055.
AIRCRAFT SHEET METAL TOOL KIT
Isham Inc. offers an aircraft sheet
metal tool kit for building Van's RV
aircraft. It includes a pneumatic
squeezer and DRDT-2 dimpler for
producing the highest quality parts
and assemblies. The kit features the
highest quality professional and
industrial tools. There is a lifetime
guarantee on most tools.
For more information visit www.planetools.com or call
(316) 755-0713.
FABRICATION TOOLS
Dagger Tools offers a wide selection
of metal shaping and fabrication
tools. It has wood and plastic bossing
mallets, shot bags, shrinker/stretchers,
English wheels, and welding products.
For more information visit www.daggertools.com or
call (248) 735-1123.
WRENCH
The Stahlwille Fast Ratch is
designed with the aerospace
tech in mind. Applications
targeted are AN fittings and B
nuts as well as hex nuts and bolts. The Fast Ratch acts as an open end
ratcheting wrench. It features laser cut stainless steel, FOD free design,
works on both metric and SAE fasteners, and has a lifetime warranty. It
causes no damage to fasteners.
For more information visit www.stahlwille.com or call (800) 695-2714.
BREAKOUT BOXES AND CABLES
Hart Aviation breakout boxes and cables
are designed for technicians to provide
ease of access to aircraft electrical circuits
for testing and trouble shooting. Permits
quick and efficient diagnosis and testing
of electrical circuits. They are adaptable
to multiple aircraft systems and aircraft
types, are compact for portability, convenient
to use, and reasonably priced.
For more information visit www.hart-aviation.com.
ROLLER RATCHET
MJ Suppliers offers a 1/4-inch on-off roller
ratchet with 5-degree offset. It allows one
ratchet for removing Hi-Lok collars and
installing Hi-Lok pins with 90 inch-pound
torque. The ratchet features a stainlesssteel
handle, lifetime warranty, and is
made in the United States.
For more information call (724) 695-7734 or visit www.
mjsuppliers.com.
SCREW EXTRACTOR
Alden Corp. offers the
ProGrabit tool for removing
screws or bolts with
any type of damaged screw
head, from any material. It is
a drill and extractor in one
tool. No more guesswork
in matching drill size with
extractor, as with manual
tools. The quick connect
chuck capability increases
its ease of use: simply
drill, then flip, and extract.
ProGrabit is made from high
quality, tempered M2 highspeed
tool steel for long drill
tip life. Its state-of-the-art
tempering process withstands
temperatures to 1,000
F, without softening. It has
been specifically engineered
to drill into bolts of grade 8
or 10.9 class, without excessive
wear.
For more information visit www.aldn.com
or call (800) 832-5336.
DIGITAL CABLE
TENSIOMETERS
Brown Aviation Tool
Supply Co. is now stocking
Tensitron digital cable
tensiometers. Completely
made in the USA, factory
calibrated and fully traceable
to national standards,
Tensitron digital tensiometers
feature a large
easy-to-read graphic display.
Unlike old mechanical
units, there are no riser blocks to use or keep
track of, simply enter the diameter of cable you are
working with, engage the tool, and that's it — you
have a perfect tension reading.
Visit www.browntool.com or call (800) 587-3883 for more information.
MINI SWAGER
MJ Suppliers offers the AJD110503-1 mini swager
and MS14103-5 bearing. Features include on-wing
limited access, hand-held with secondary anvil, and
four rollers. It is manufactured in the United States.
For more information visit www.mjsuppliers.com or call (724) 695-7734.
THREADED DRILL MOTOR
Brown Tool is now stocking the super small and
super small Ingersoll-Rand miniature threaded drill
motor. At only 8 1/2 inches long, this is the smallest
threaded drill on the market and will get into the
tightest spots.
For more information visit www.browntool.com or call (800) 587-3883.
LONG-REACH LONG-NOSE PLIERS
Klein Tools' long-reach long-nose pliers have long
handles and nose, and are available in straight
nose, 45-degree bent nose, and 90-degree bent nose
styles. The pliers allows greater access to hard-toreach
areas and provide greater holding power at
tip with minimal effort. The bent nose styles have
better reach around obstructions. They are hot riveted
for smooth opening and closing action. They
are forged and hardened for long life.
For more information visit www.kleintools.com or call (847) 821-5500.
PNEUMATIC TOOLS
Taylor Pneumatic Tool Co. has more
than 75 years combined experience
and offers a full line of pneumatic
hammers, drills, grinders, impacts,
riveters, sanders, and screwdrivers. It
has a friendly, knowledgeable staff
and offers limited lifetime warranty,
same-day shipping 95 percent of the
time.
For more information visit www.taylorpneumatic.com
or call (800) 805-8665.
SPLIT RIVETER
Brown Tool introduces the GageBilt
Products PowerMAX Split Riveter.
Specifically designed to install blind
rivets (such as CherryMAX and
HuckMAX) in very hard-to-reach
areas, the PowerMAX Riveter features
a 3- or 8-foot hose between
the power unit and the pulling
head. Completely manufactured in
the United States.
For more information, visit www.browntool.com or
call (800) 587-3883.
STORAGE CABINETS
SteelHead Design is a manufacturer
of industrial quality storage cabinets
and workstations. The industrial
quality storage and workstations feature
reinforced construction, heavyduty
ball bearing drawer slides, and
stainless steel or powder coated steel
construction. The modular systems
can be configured in many ways.
For more information visit www.steelheadesign.com
or call (619) 593-4783.
HAND RIVET SQUEEZER KIT
Brown Tool offers its exclusive TATCO hand rivet squeezer
kit. The kit contains the genuine TATCO hand rivet
squeezer with three different interchangeable yokes (1
1/2-, 2-, and 3-inch) along with six assorted squeeze sets
for button head and flush rivets. Unlike some competitive
tools that are cloned and made off shore, this kit is
completely manufactured in the USA to exacting standards
and comes in a heavy-duty custom-fitted storage
case to prevent FOD and tool loss.
For more information, visit www.browntool.com or (800) 587-3883.
INSTALLATION
KIT
The Model BATVLHK-
102 Jo-Bolt
installation kit
contains everything
you need
to easily install
5/32-, 3/16-, and
1/4-inch Jo-Bolt
type fasteners in
both button head
and flush styles.
Includes hand
ratchet, Jo-Bolt
Grip Gage, and all drivers and socket heads in a
heavy-duty storage case. Made in the United States.
For more information, visit www.browntool.com or (800) 587-3883.
DOUBLECUT
SHEAR
KD-200
double-cut
shear from
Kett Tool
cuts mild
steel up to
18 gauge
quickly
and quietly
with no bending or warpage to the material. It
provides a fast clean cut and cuts straight or contour
lines. There is no distortion in the metal being
cut. The shear has a powerful 5-amp single speed
motor which is double insulated. It cuts 180 inches
per minute.
For more information visit www.kett-tool.com or call (513) 271-0333.
BEARING AND
FASTENER
TOOLS
J.R. Potter &
Associates
distributes
aircraft bearing
and fastener
tools
and hydraulic
system conical
seals, develops
custom tool
and instrument kits, and carries major aerospace
component manufacturer products. It has 650 different
part numbers in stock and carries a third
of a million conical seals. It is also a supplier of
custom-kitted tools and inspection instruments and
carries all Shafer bearing tools for swaging systems.
The company offers expert consultation and fast
shipping.
For more information visit www.toolsforaircraft.com .
