GE Sensing & Inspection Technologies
1100 Technology Park Dr., Bellerica, MA 01821
(800) 833-9438 (for Sensing)
(866) 243-2638 (for Inspection Technologies)
GE Sensing & Inspection Technologies provides sensor-based products for measuring temperature, pressure, liquid level, humidity, gas concentration, and flow rate. It manufactures ultrasonic, remote visual inspection, radiographic, and eddy current equipment for non-destructive testing. GE offers ground and flight test pressure measurement devices and nondestructive testing and remote visual inspection equipment. For technical support for sensing products call (800) 833-9438 or email firstname.lastname@example.org. For technical support for inspection technologies call (866) 243-2638 or email email@example.com
122 S. 4th Ave., Pasco, WA 99301
UniWest is a 24-year-old company that developes NDT inspection tools for the aerospace industry. Its eddy current products, eddy current probes, instruments, standards, systems, and training, are used on engines, airframes, landing gear systems, and components. For technical support contact Burt Goranson at firstname.lastname@example.org or (509) 544-0720. Hours: 6:30 a.m. to 5:00 p.m.
Atlas Inspection Technologies Inc.
500 Elliott Ave. W., Seattle, WA 98119
Atlas Inspection Technologies provides a single source vendor for all remote visual inspection needs: rentals, sales, and repairs of borescopes, fiberscopes, and videoscopes. Fast turn time on repairs. Sales include new and pre-owned equipment. Equipment usually ships same day with overnight delivery available to many locations. Repairs done on all makes and models. Atlas works at the component level saving you time and money. Ask about free evaluations and one-half price rentals during the repair process. Sales include equipment for custom applications. For technical support contact Darren Billings at email@example.com or (800) 281-0650. Hours: 24/7.
Hart Aviation Consulting Inc.
8789 William Cody Dr., Evergreen, CO 80439
Hart Aviation Consulting Inc. designs and manufactures electrical test equipment for business aircraft. Products include electrical breakout boxes, test equipment, and tooling. For technical support contact Ray Harting at firstname.lastname@example.org or (303) 670-5167 Hours: 8:00 a.m. - 5:00 p.m.
1425 N.W. 88th Ave., Doral, FL 33172
Ludeca offers preventive, predictive, and corrective maintenance solutions including laser shaft alignment, pulley alignment, bore alignment, straightness and flatness measurement, monitoring of thermal growth, bearing heaters, vibration analysis, and balancing equipment as well as software, services, and training. EDDYTHERM induction heater to prevent premature bearing failures due to overheating features temperature selection and holding; automatic and independent demagnetizing; time and power selection; instantaneous display of actual temperature; and shrink-fitting bearings, sleeves, sprockets, couplings, impellers, crane wheels, and gears, etc., of up to 880 pounds. For technical support contact Nils Heilemann at email@example.com or (305) 591-8935. Hours: 9 a.m. - 5 p.m. EST.
Dynamic Solutions Systems Inc.
2332 La Mirada Dr., Suite 100, Vista, CA 92081
DSS was founded in 1992 to develop high-end/low-cost vibration equipment. DSS developed the MicroVib II, an aircraft vibration analysis/balancing system. Hours of operation are 7 a.m. to 7 p.m. For technical support contact Rich Welsch at firstname.lastname@example.org.
2686 Davidson Cemetery Rd.
Clarksville, TN 37043
(931) 362-4009 • (931) 362-4009 (Fax)
BorescopesRus began services in 1983 in California and in 1989 created a sales office in Tennessee. Its videoscope line was prototyped in 2003. Production began in 2004 on a limited basis; the full production line was completed in 2005. Repairs and manufactures borescopes and videoscopes. For technical support contact Chris Gallo at email@example.com. Hours of service: 8:30 a.m. to 4:30 p.m. (CST).
6213 Grissom Rd., Ste. 603
San Antonio, TX 78238
(210) 520-8900 • (210) 568-4797 (Fax)
Global Borescope has provided borescope support services since 1999. It repairs and rents most makes and models now on the market and also repairs many units rendered obsolete by other major manufacturers. It has a complete line of videoscopes, fiberscopes, and rigids. Its new 4 mm x 1 meter extreme videoscope is perfect for small turbine inspections. For product support contact David Calderon at firstname.lastname@example.org or (210) 520-8900. Hours: 24/7.
Machida offers flexible borescopes, video systems, light sources, and accessories. For technical support contact
OPTIM Inc. 64 Technology Park Rd., Sturbridge, MA 01566 (508) 347-5100 • (508) 347-2380 (FAX) www.optimnet.com OPTIM Inc. manufactures flexible fiberscopes, borescopes, and...